Carl Wezel Precision Finishing Mill
12" (300mm) X 14" (350mm) Carl Wezel Precision Finishing Mill
Manufacturer: Carl Wezel K.G. (Krupp)
Model: Bw 300/350
Roll Size: 12" Dia. X 14" Face
(300mm Dia. X 350mm Face)
Serial Number: 740523
Year Of Manufacture: 1975
Purpose: Precision Finish Rolling Of Narrow Width Thin
Gauge Metal Using Automatic Gauge Control With
Vollmer Thickness Gauges
Capacity:
Max. Width Of Strip: 10" (254mm)
Width Previously Rolled: 4" (100mm) Normal
Min. Width Of Strip: .787" (20mm)
Width Tolerance: +/- 0.020" (+/- 0.5mm)
Max. Thickness Of Strip: 0.157" (4mm)
Min. Thickness Of Strip: 0.01" (0.25mm)
Thickness Tolerance: +/- 0.0006" (+/- 0.015mm)
Max. Coil Weight: 4400 Lbs. (2000 Kg)
Mill Drive: 58 Kw, 260/2600 Rpm, 58/420 Volts, 58 Kva
Screwdowns: Electromechanical
Screwdown Speed: 0.078-1.0 Ipm (2-25mm/Min.)
Pre-Stressed Housings
Mill Equipped With Load Cells
Roller Bearing On Chocks
Water-Cooled Rolls
Thickness Gauge:
Manufacturer: Vollmer
Model: Type Vbm 1063 E
Type Gauge Readout: Vollmer Vmf 3
Strip Chart Recorder
Mill Speed (Infinitely Variable): 0-200 Fpm (0-60m/Min.)
Payoff:
Type: Expanding Mandrel
Mandrel Size: 12"/14" I.D. X 10" Face (300/350mm X 250mm)
Drive: 9 / 1 Kw
Hydraulic Coil Holdown
Hydraulic Entry Leveller
Edge Guides
Recoiler:
Type: Expanding Mandrel
Drive: 1.2/12 Kw, 100/1060 Rpm, 40/200 V, 7.6 Amps
Hydraulic Coil Holddown
-Mill Has Scr Thyristor Drive System
-Mill Equipped W/Self-Contained Hydraulic Package, Controls And Storage Tank
-Mill Equipped W/Automatic Gauge Control System Using Vollmer Thickness
Gauges
Ref. CGS41634
George Jones Co. 16" (410mm) X 20 1/2" (520mm) Breakdown Mill
16" (410mm) X 20 1/2" (520mm) Jones 2-Hi Breakdown Mill [12544]
Specifications:
Manufacturer: George Jones Co. (U.K.) Ltd.
Roll Diameter:. 410mm (16")
Roll Face: 520mm (20 1/2")
Maximum Input Thickness: 10.5mm (0.40")
Based On Copper Of Phosphor Bronze. Less For Steel.
Maximum Width (As Used): 400mm (15.7")
Line Speed: 0-20m/Min. (0-65 Fpm)
Maximum Coil O.D.: 1200mm (47 1/4")
Coil I.D. Range: 300-500mm (11.8"- 19.7")
Maximum Coil Weight: 2000 Kg (4400 Lbs.)
Main Drive Motor: 300 Kw, 440 Volts, 650-1600 Rpm,
460 Amps, D.C. Variable Speed
Screwdown Type: Motorized
Screwdown Motor: 7 1/2 Hp
Roll Bearing Type: .Roller - Fag 23956mb
Model:. Fag 23956mb
No. Of Bearings Per Set: 12
No. Of Spare Rolls: 2
Uncoiler
Upcoiler: . 45 Kw, 440 Volts, 1150-1500 Rpm, 120 Amps
Single Direction Mill
Includes One Set Of Spare Rolls
Type Of Rolling Oil: Emulsion
Ref. CGS41635
Hitachi 4"(105mm) X 15 3/4"(400mm) X 13"(330mm) 4-Hi Reversing Mill
4"(105mm) X 15 3/4"(400mm) X 13"(330mm) Hitachi 4-Hi Reversing Mill
Specifications:
Manufacturer: Hitachi (Japan)
Type: 4-Hi Cold Reversing Rolling Mill
Year Of Manufacture: 1969
Strip Width: 180mm - 310mm (7"- 12.2")
Thcikness Range As Used: 1.0mm - 0.02mm (.040"- .0008")
Rolling Speed: 0-200 M/Min. (0-650 Fpm)
Based On Copper Of Phosphor Bronze
Work Roll Diameter: 105mm (4.13")
Work Roll Width: 375mm (14 3/4")
Backup Roll Diameter: 400mm (15 3/4")
Backup Roll Width: 330mm (13")
Overall Roll Length: 1620mm (63 3/4")
Type Bearings: Roller
Model Of Bearings: 230rv 330 2
Driven Roll: Backup Roll Driven Mill
Type Of Screwdown: Hydraulic
Type Of Thickness Gauges: Vollmer Contact, No Agc
Maximum Coil O.D.: 1200mm (47 1/4")
Coil I.D. Range: 485mm - 500mm (19"- 19.685")
Maximum Coil Weight: 1000 Kg (2200 Lbs.)
Main Drive Motor:
75 Kw, 380 Volt, 500-1000 Rpm, 205 Amp, 380 Volt Dc Variable Speed
Winder Drive Motors:
Quantity: 2
37 Kw, 600-1000 Rpm, 95 Amp, 380 Volt Dc Variable Speed
Quantity Of Spare Rolls: 3 Sets
Kaltex 6300mm Ring Rolling Mill year: 2008
6300mm Ring Rolling Mill
Make: Kaltex
Make year: 2008
Ringmm
Hydraulic Pump: 4sets-A4V-180 (REXROTH)
Max Total Flow :720 Litter/min
Operation Pressure: 210 Kg/㎠
Grease Lubrication Unit :2 sets