SMS / VOEST 350,000 TPY,15 STAND BAR MILL
MANUFACTURER: SMS / VOEST ALPINE
AGE: 1987
CAPACITY: 350,000 TPY DEPENDING ON PRODUCT
(OPERATING AT 5200 HOURS PER YEAR)
PRODUCTS:
REBAR: 0.50” TO 1.25” (12 MM TO 32 MM)
SQUARES 0.039" TO 1” (10 MM TO 25 MM)
ROUNDS: 0.039" TO 1” (10 MM TO 25 MM)
FLATS: 0.62” X 0.31” (16 MM X 8 MM)
2.5” X 0.50” (65 MM X 12 MM)
BILLETS: 39’ LENGTH (12 M)
3.54” SQUARE (90 MM)
5” SQUARE (127 MM)
DETAILS UPON REQUEST
SMS / VOEST 150,000 TPY 15 STAND BAR MILL CON'T
MAX MILL SPEED: 2450 FPM (12.5 MPS)
COMPLETE HIGH-PRODUCTION COLD ROLLING MILLS AND ALLIED EQUIPMENT 30 TON CAPACITY
21” Diameter Work Roll x 53” Diameter Back-Up Roll x 66” Face Width Pittsburgh 4-High Tandem Mill
Consisting of:
• Receiving Conveyor Uncoiler with Passline Rollers and Peeler System
• Stand No. 1: (2)-1,500 HP, 300 to 670 RPM, 6.625:1 Ratio Motors (Total 3,000 HP)
• Stand No. 2: (2)-2,250 HP, 220 to 450 RPM, 1.269:1 Ratio Motors (Total 4,500 HP)
• Stand No. 3: (2)-2,250 HP, 220 to 450 RPM, 1.02:1 Ratio Motors (Total 4,500 HP)
• Stand No. 4: (2)-2,250 HP, 220 to 450 RPM, 1.289:1 Ratio Motors (Total 4,500 HP)
• Recoiler: (2)-600 HP, 200 to 1,800 RPM, 1.43:1 Ratio Motors (Total 1,200 HP), 24” Diameter x 66” Wide Drum, Hydraulic Pushoff
• Belt Wrapper
• Pit Type Coil Car with Three-Coil Delivery Ramp
• AC to DC Motor Generator Sets with Controls
• Maximum Speed: 5,000 FPM
21” Diameter Work Roll x 53” Diameter Back-Up Roll x 66” Face Width Pittsburgh 4-High Temper Pass Mill
Consisting of:
• Two-Coil Prep Station
• Coil Loader with Driven Blocker Rolls
• 30 Ton Double-End Expanding Mandrel Uncoiler with (2) Regenerative Drives
• Passline Roll
• 4-High Mill, Dual Drive, (2)-500 HP, 450 to 900 RPM, 1.90:1 Ratio Motors (Total 1,000 HP)
• Recoiler, 24” Diameter x 66” Wide Drum, Gear Reducer, (2) 600 HP, 250 to 700 RPM, 1.6:1 Ratio Motors (Total 1,200 HP), Hydraulic Pushoff
• Belt Wrapper
• Pit Type Coil Car
• Three-Stage Delivery Ramp
• AC to DC Motor Generator Sets with Controls
• Maximum Speed: 3,000 FPM
Ref : 4122
TANDEM COLD MILL 5 STAND
Year of Manufacture 1998
Materials HRS and HSLA
Production 1,200,000tpa
Coil weight 25t max
Strip width 610-1540mm
Max entry gauge 6mm
Min Exit gauge 0.22mm
Ref : 4124
SUNDWIG / ROBERTSON COLD ROLL STEEL STRAPPING EQUIPMENT
Steel Strapping: 12.7mm - 32mm
16 Oscillating Recoilers
Complete With
400mm 20HI Sundwig Cold Reversing Mill
400mm 20HI Robertson 4-HI Cold Reducing Mill
Bell Type Annealing Furnaces: 1 Hydrogen Atmosphere New 2006 / 4 Nitrogen Atmosphere
3 Slitting Lines: 1250mm x 3mm , 450mm x 4mm,650mm x 1.8mm
Patenting Line with Furnace, Lead Bath & Accumulator
Coil Build Up Line
Steel Strapping Line with 16 Oscillating Wind Recoilers, Painting & Heat Treating
PKM Automatic Coil Packaging Line with 2 Scales
3 Roll Grinders, Lab Machines
Ref : 4125
