Aluminium-and-Other-Non-Fer.jpgCement-Plant.jpgCrawler-Cranes.jpgCrude-Oil-Refineries.jpgForging-Plant-and-Machinery.jpgForging-Plant.jpgHeavy-Machine-Tools.jpgHeavy-Material-Handling.jpgIron-&-Steel-Mills.jpgMachine-Tools.jpgPacking-Plants.jpgPaper-Plant-and-Machinery.jpgPort-Handling.jpgPower-Plant.jpgPrinting-Press-Plant.jpgSheet-Metal-Plant-and-Machi.jpgVertical-Turret-Lathes.jpg

FOR LATEST OFFERS PLEASE VISIT OUR NEW WEBSITE www.bpmbllp.com

TOSCHI TISSUE MACHINE FOR THE PRODUCTION OF 25 TONS/DAY OF 20 GRS TISSUE FROM 2 GRADES RECYCLED PAPERS

TOSCHI COMPLETE TISSUE MACHINE of 1986, for the production of 25 tons/day of 20 grs tissue from 2 grades recycled papers. Max Web width: 2700 mm. With: Toschi pulper, transfer pumps to the stock tank via a vibrating screen, transfer pumps from cleaners to a stock tank with agitator, refiner and in-line deflaker, Nash vacuum pump, fan pump to machine, wire section through to dry end. 3 mts wide Yankee inspected and polished in 2009. With steam drying the Yankee operating at  6 bar pressure. There is no the inking plant and customer is making 2 grades of recycled paper. High grade waste is used for with paper. Mix of grey back board an hl2 and hl1 for our 2nd grade. The Yankee is 3 meters wide.  in good condition and visible in production.

Ref. 61269

BELOIT PM6 SUCTION BREAST ROLL/YANKEE PAPER MACHINE

 

BELOIT PM6 Suction Breast Roll/Yankee Paper Machine of 1969/70. Headbox width: 2134 mm. Wire width: 2240 mm. Wire length: 16.000 mm. Suction breast roll dia.: 956,4 mm (vacuum 2,1m 2 suction zones). Suction breast roll’s wire: 3012 mm x 3300 mm, Mesh 5. Press felt width: 2500 mm. Press felt length: 25.000 mm. Press section: one suction and one blind press. Suction press roll dia. and face: 680 mm x 2545 mm. Blind press roll dia. and face: 558,8 mm x 2388 mm. Yankee dia.: 3657 mm. Yankee width: 2476,5 mm. Max steam pressure: 12 atm. Hood. Steam pressure at the hood: 39 atm. Max steam temperature: 170 °C. Hood  ventilator capacity: 4 x 25000 m3/h.  Hood motor (4 pieces): 45KW/1500RPM. No. 1 exhaust ventilator motor: 13KW/1500RPM. Drive: DC motors and thyristor’s control. Max paper width: 2100 mm. Max operating speed: 900 m/min. Paper basis weight: 15-35 gsm. Max production capacity: 27,5 T/D. Pulper: (1 piece)  14m3, motor 90 KW/950RPM and no. 1 motor 75KW/730RPM. With BELOIT stock preparation. Fan pump, Serlachius, Finland, type U400/470: Motor: 220 KW/50-1250 RPM (1 piece) Q=30500 l/min. H=33 m WC. Selectifier, Bird-Beloit, Holes dia. 2,2 mm: Motor: 45KW/950 RPM (1 piece). Polydisk Filter, Jones: Motor: 7,5 KW (AC)/730 RPM (1 pece). With:  no. 9 KBS and ABS Stock pumps. Zultzer Vacuum pump type, KRC-4st. 52-25 (GN19),  Q(inlet)=197 m3/min., Q(outlet)=133 m3/min., Vacuum 43 kPa, Motor: 250 KW/1485 RPM (1 piece).   Beloit (I) rewinder with 3 unwind stands:  width of 2100 mm, dia. of 1500 mm and speed of 750 m/min. Capacity: 6600 tons/year. Visible in operation.

Ref. 61270

BELOIT – FAMPA

 


BELOIT – FAMPA of 1978 for max web width of 3.4 m. Max speed: 820 m/min. Wire dimensions (width/length): 3620mm x 22,4 m. Felt dimensions: 3843 mm x 28 m. Output: 70 tons/day (40 grs) to 50 tons/day (16 grs). Average 21.000 tons. Grammages: from 16 to 40 grs (both RCP and VF pulp), bathroom and kitchen towels tissue. Both wet and dry hoods supplied with steam. New VALMET (METSO) Yankee cylinder in 1999, metal sprayed in 2007 and max working pressure of 7 bars. Major rebuilts: in 2005 new headbox by Toscotec (improved formation quality) + pressure screen, microflotation and bellmer press. In 2010: Yankee’s wet hood major overhaul. Available equipments: headbox (Toscotec, stainless steel), main frame: wire, felt, Yankee section (carbon steel), white water underwire tray (stainless steel), wire and felt all guiding and drive rolls (incl. gearboxes), pick up unit (wire to felt), blind press incl. drive gearbox, suction press incl. drive gearbox, Yankee cylinder (cast iron), cleaning, cutting and crepping Yankee’s doctor blades (carbon steel), Yankee wet and dry hoods (carbon/stainless steel), heat recovery fans -4 pcs, pope reel incl. drive gearbox, slitting saws -2pcs, tambour rolls (rubber covered) -12 pcs, tambour rolls (steel) -3 pcs, drive control system (DCS) (ABB), including wire, felt, Yankee, pope motors, spare rolls: breast roll -1pc, wire drive roll -1pc, wire guiding roll -3pcs, felt guiding roll -5pcs, suction press roll -1 pc, blind press roll -2pcs, steam distribution and reduction unit: reduction valve (40/16 bars) -1pc, steam injector -1pc, condensate tank 3m3 -1pc, condensate pump -2pcs.  Together with L12  - converting line, available equipment: Fabio Perini Rewinder mod. Alfa including Kit C, manufactured in 1989, rebuilts in 2003 and 2005 (DESL unit, embossing unit not available). Paper web width: 3,4 m, max speed: 500 m/min., sheet length: 125 mm or 250 mm, min. paper length on roll: 13,5 m – roll dia.: 90 mm, max paper length on roll: 70 m – roll dia.: 135 mm. Output: 70 tons/day (70 m/roll), 30 tons/day (18 m/roll), average for last 3 years 14.000 Tons. Rewinder unit with main motor but without main gearbox, 2 unwind stands (max base paper dia.: 2,8 m), including gearboxes. Tail sealer (max output 20 logs/min.), logs accumulator. With Fabio Perini log saws mod. 140T: 2 logsaws installed at L12 rewinder outfeed, max speed per one logsaw: 20 logs/min. With KPL Core machine. With L14 – converting line, available equipment: PCMC mod. R200 rewinder, manufactured in 1975, rebuilts in 2000 (DESL unit from Fabio Perini), paper web width: 1,7 m, rewinder unit with all motors and gearboxes, embossing: asymmetric (not laminated) and drop (laminated – DESL), including motors and gearboxes. Max speed: 600 m/min. (asymmetric embossing), 450 m/min. (DESL) 200 m/min. (printed). Sheet length: 140 mm or 280 mm. Min. paper length on roll: 11,2 m – roll dia.: 90 mm. Max paper length on roll: 50 m – roll dia.: 125 mm. Output: 18 tons/day (50 m/roll), 12 tons/day (18m/roll), average for last 3 years: 4200 tons, 3 unwind stands (max base paper dia.: 1,5 m) and logs accumulator. With PCMC printer, manufactured in 1975, 2 colors, flexoprinting (3 rolls per colour: anilox, sleeve, press). With Fabio Perini log saws mod. 140T: 1 logsaws installed at L14 rewinder outfeed, max speed per one logsaw: 20 logs/min. and PCMC core machine.  Visible in production. 

 

Ref. 61271

 

OVER MECCANICA (ITA)

 

Over Meccanica (ITA), built in 1985. Its capacity was about 20 tons/day and its max working speed about 500/600 m/min. Max web width: 2200mm. Mass of paper at Pope Reel: 16-30 g/m2. It is now stopped since about two years. It is not in excellent conditions but it is equipped with: Stock Preparation System (including pulper), Approach flow system (fan pump+separator), Paper machine including (complete from HB to pope reel), Hood plant, Drives and gear boxes, Rewinder, Stainless steel tanks, Stainless steel pipes and Hot disperser plant. Not included: boiler (available for separate price) and electrical plant. 

Ref. 61272

Copyright © 2013-14 Channels Global Sourcing LLP. All Rights Reserved
Powered By MSD Solutions