FOR LATEST OFFERS PLEASE VISIT OUR NEW WEBSITE www.bpmbllp.com

EUMCO MD HOG-10 electro-hydraulic drop forging hammer

10 tons electro-hydraulic drop forging hammer

10TON ,ELECTRO-HYDRAULIC DROP  FORGING HAMMER

MODEL MD HOG-10

MAKE:EUMCO(GERMANY)

YEAR:1964

CROWN:REPLACED BY BRAND NEW (YEAR:2010)

OVERHAUL(YEAR;2010)

SERIAL NUMBER:105466

ELECTRIC/MOTOR REPLACED BY BRAND NEW (YEAR:2010)

Motor:150 kW(75kw x2=150kw)

Total Weight 143 t

440V/60HZ

TABLE:3800x2600mm

AWS Schaefer HFC 90/6 9000ton hydro forming press Year: 2011

9000ton hydro forming press

Make: AWS Schaefer(Germany)

Year: 2011

press type: HFC 90/6

Dimensions:Length 24 m xWidth 14 mxHeight above floor 7,5 m

Machine weight:Without equipment 400 t

Horizontal force LH/RH, per side 4 X 550 KN

Horizontal cylinder stroke: 200 mm

Horizontal cylinder speed: 50 mm / sec

Vertical force: 9.000 KN

Vertical stroke: 600 mm

Vertical speed :70 mm / sec

Clamp stroke: 300 mm

Clamp speed: 100 mm / sec

Inner pipe pressure :1.000 bar

Pipe high-pressure pump: 4 x max. 30 l/min; max. 1000 bar; 35 KW

Pre-fill pump high-pressure pump: 2 x max. 250 l/min; 5,2 bar; 4 KW

Pipe pre-fill pump: 4 x max. 112 L/min; 30 bar; 8,6 kW

Cooling pump: 1 x max. 250 L/min; 5,2 bar; 4 kW

Cooling water – Heat exchanger

Cooling power :200 KW

Cooling water volume flow rate :500 l / min.

Operating pressure Hydraulic unit :280 bar

Nominal current: 1530 A

Supply voltage: 440 V

Network connection achievement: 960 KW

Ref. No. CGS61711

Hyongin 6500Ton Open Die Forging Press year: 2008

6500Ton Open Die Forging Press

Make year: 2008

Make: Hyongin(Korea)

1. Press Type: Four column push down Oil hydraulic system

2. Nominal force (static working pressure of 320 bar): 5,000 Tons

3. Up-setting force (static working pressure of 420 bar): 6,500 Tons

4. Daylight: 5,200 mm

5. Stroke of Movable cross head: 2,700 mm

6. Main Ram dia (Center cylinder) :1 set - ￠950 mm

7. Side Ram dia (Side cylinder) :2 sets - ￠750 mm

8. Return cylinder Ram dia :2 sets - ￠300 mm

9. Moving Table Width: 2,600×Length 6,600 mm

10. Moving Table stroke (center to both side 2,750mm): 5,500 mm

11. Approaching speed: 300 mm/sec

12. Main cylinder Forging speed (2,200 tons/ 320 bar): 163 mm/sec

13. All cylinder Forging speed (5,000 tons/ 320 bar): 73 mm/sec

14. Up-setting Forging speed (6,500 tons/ 420 bar): 10 mm/sec

15. Return speed: 270 mm/sec

16. Hydraulic Main pump: 12 sets Rexroth Plunger Pump (A7VO A2FO)

17. Electric Main Motor: 12 sets 300Kw 6p 3.3KV – 3,600 Kw HYUNDAI

18. Main Tank volume: 42,000 Litter

19. Overall dimension Height above of floor level :13,900mm Depth: 3,760 mm

20. Weight of press: Approx. 1,200 ton

21. Attachment Equipment

1) Tool shifting device Stroke: 4,800 mm

2) Top die clamping device

3) Die magazine device 4 stages

4) Pop-up turn table (for ingot) :50tons×￠1,300mm

80ton Manipulator

Make:Hyongin(Korea)

Year:2008

1. Manipulator type:Rail bound Manipulator Oil hydraulic system

2. Nominal carrying capacity:80 Tons

3. Load moment:160 Meter-Tons

4. Tongs openings:max ￠2,200 / min ￠420 mm

5. max Turning diameter:￠3,600 mm

6. min. Tongs central height above rails:1,800 mm

7. max. Tongs central height above rails:3,000 mm

8. Vertical stroke of tongs parallel to floor:1,200 mm

9. Vertical tilting angle of tongs:Up 13.8 degree / Down 13.8 degree

10. Horizontal side shift of tongs:± 400 mm

11. Horizontal slew angle of tongs:± 13 degree

12. Central rail distance:4,200 mm

13. Rotation speed:max 16 rpm

14. Travelling speed:30~330/660 mm/sec

15. Lifting speed:120 mm/sec

16. Travelling Distance:18 meter

17. Hydraulic Main pump:4 sets Rexroth Plunger Pump (A7VO)

18. Electric Main Motor:4 sets 132Kw 6p 440V – 528 Kw

HYUNDAI

19. Overall dimension:

Height 5,200mm Width 6,700mm Length 15,700mm

20. Weight of manipulator:Approx. 400 ton

Ref. No.  CGS61712