Idra Ol 1200 Prp Coldchamber-Horizontal Die Casting Machine
Idra Ol 1200 Prp Coldchamber-Horizontal Die Casting Machine
manufacturer IDRA
type OL 1200 PRP
year of manufacture 2001
EQUIPMENT
free programmable command SIEMENS S7
operator Panel OP
3-phase injection system with
intensification
central autom. die height adjustment
core pull units M 2 F 1
hydraulic stroke limitation system
automatic central lubrication Öl / oil
automatic tie bar moving system 2 x
proportional valve adjustment
hydraulic ejector
cooling system
motor
hydraulical pump manufacturer VICKERS
medium HFC
machine configuration +
documentation
TECHNICAL DETAILS
locking force 13.250 kN
injection force 976 kN
ejector force 493 kN
die mounting platens 1600 * 1600 mm
distance between tie bars 1020 * 1020 mm
tie bar diameter 215 mm
Max. casting weight 23,4 kg
min./ max. die height 450 / 1100 mm
ejector stroke 230 mm
die opening stroke 1070 mm
motor capacity 62 KW
dimension machine l/w/h 12,5 * 4,0 * 4,5 m
weight 57,6 to
Ref. CGS91323
Italpresse SC 1250 Coldchamber-Horizontal Die Casting Machine
Italpresse SC 1250 Coldchamber-Horizontal Die Casting Machine
manufacturer ITALPRESSE
type SC 1250
year of manufacture 1990
EQUIPMENT
free programmable command IP – SIEMENS S5
3-phase injection system with
intensification
autom. die height adjustment
core pull units
hydraulic stroke limitation system
automatic tie bar pulling system 1 x
automatic central lubrication
autom. safety door
machine configuration D
TECHNICAL DETAILS
locking force 1350 to
injection force 109 to
ejector force 55 to
die mounting platens 1650 * 1660 mm
distance between tie bars 1010 * 1010 mm
min./ max. die height 475-1200 mm
ejector stroke 240 mm
die opening stroke 1050 mm
max. casting AL. 26,4 kg
casting area 3855 cm²
free cycle time 270 n/h
Tie bar diameter 220 mm
motor capacity 75 kW
dimension machine l/w/h 10,2 * 2,85 * 3,7 m
weight 65 to
Ref. CGS91324
Pechiney Jumbo 3C Strip Caster And Auxiliary Equipment
Pechiney JUMBO Strip Caster and Auxiliary Equipment
Manufacturer Pechiney, new 2003
Type JUMBO 3C
Strip width 1000 - 1700 mm
Gauge 5.0 - 6.0 mm
Roll length 1900 mm
Roll diameter max. 960 mm
Coil weight 15 ton
Scope of supply :
- Melting furnace 25 ton
- Holding furnace 25 ton
- Induction furnace 6 ton
- Filter box
- Degassing system ALPUR 15 t/h
- JUMBO 3CM Caster PECHINEY
- Scrap Briquetting machine, 400 kg/h
- Scraps handling machinery
- Dedusting plant
Ref. CGS91334
IMF FAST LOOP MOLDING LINE
IMF Fast Loop No Bake Molding System With IMF
Automatic Mold Closer (900mm x 1100mm x 400/400mm),
18 Molds Per Hour, New 1996, Installed 1998
With: 25 TPH IMF Model T36/25 Articulated Arm Sand Mixer,
3 Part Resin System, Sand Heaters, Compaction Table, Rollover, Mold Coating Station, Hydraulics for Closer, 3 Section Mold Storage Conveyors, Pouring Cooling Shakeout with Quiptec 12 Station Carousel, 2 Tier Mold Conveyor, & 8 TPH Shakeout, Presently Removed and in Storage
IMF Fast Loop Upgrade to 30 MPH in 2002 With 10 T Shakeout with Water Cooled Bearings, Robot Manipulator, Closed Mold Transfer Station, Over/Under Mold Storage, Pouring, and Over/Under Cooling Conveyors, Preheat Station, Tilt and Painting Station Presently shrink wrapped and in crates-Never been in service
Ref. CGS10131
