FROEHLICH UNI 330 / 1000 HORIZONTAL CENTRIFUGAL CASTING LINE
1 unused horizontal centrifugal casting line
Make: Froehlich, Model: UNI 330 / 1000
Year: 2009 / unused
Consisting of:
- Cleaning and brush station
- Liftable and lowerable rollerway for discharge
- Rope winch
- 2 downholders
TECHNICAL DATA:
Mold outside diameter 330 - 1000 mm
Tube lengths up to 5000 mm
Drive, stepless (1200 RPM) 2 x 45 kW
Ref. 31325
FROEHLICH VG 10 HORIZONTAL CENTRIFUGAL CASTING LINE
1 unused horizontal centrifugal casting line
Make: Froehlich, Model: VG 10
Year: 2009 / unused
Equipped with:
Large number of gravity dies for full range of work
TECHNICAL DATA:
Gravity die outside Ø 950 – 1100 mm
Gravity die inside Ø 700 mm
Gravity die length up to 700 mm
Gravity die weight max. 2,7 t
Ref. 31326
FROEHLICH VG 6 HORIZONTAL CENTRIFUGAL CASTING LINE
1 unused horizontal centrifugal casting line
Make: Froehlich, Model: VG 6
Year: 2009 / unused
Equipped with:
Large number of gravity dies for full range of work
TECHNICAL DATA:
Gravity die outside Ø 650 mm
Gravity die inside Ø 300 mm
Gravity die length up to 550 mm
Gravity die weight max. 0,7 t
Ref. 31327
UBE 800PL HORIZONTAL VERTICAL SQUEEZE CASTING MACHINE (2001)
UBE Model 800PL Horizontal Vertical Squeeze Casting Machine (2001)
CE Marked Available With Following Periphery Equipment: 2 Calamari Holding Furnaces. Working Platform. Acheson Robospray RS-DC 44. ABB Part Extracting Robot RC 08/50. Fanuc M710i Cup Handling Robot. RRS-8 Slurry Maker and Cup Washing Station. NCL40 Automatic Ladler
Description
Machine Dimensions (Machine only)
Required Floor Area (L x W) 8,000mm x 4,000mm
Maximum Height from Floor Level 4,500mm
Weight (machine only) 52 TON
Clamping Unit
Clamping Force 7.840kN
Platen Size (V x H) 1.400 x 1.400mm
Tie Bar Spacing (V x H) 930x930mm
Tie Bar Diameter 180mm
Die Stroke 760mm
Minimum Die Space (without die support) 500mm
Maximum Die Space 950mm
Die Height Adjustment Speed 42 - 200mm/min
Shot Unit
Shot Force (Max) 1.294 kN
Shot Stroke (Max) 560 mm
Tip Projection (Max) 105mm
Tip Diameter (Select) 100/112/125m
Shot Position (From die mounting surface of stationary platen) 250mm
Maximum Shot Speed 20-500mm/s
Docking Force 304KN
Docking Stroke 125mm
Ejection Unit
Ejection Force (Max) 343KN
Ejection Stroke (Max) 125mm
Hydraulic Pump
Double Vane Type : 2 sets
Discharge volume (13.72Mpa) : 204/126 lit/min 142/126 lit/min
Motor
Motor for Hydraulic Pump 75kW/ 6P/F3, 1set (Enclosed type with fan)
Hydraulic Fluid Reservoir
Reservoir Capacity 2,400 lit
Oil Cooler (Heat exchanger)
Required water volume 125lit / min
Water temperature at Inlet 32
Temperature of hydraulic oil less than 50
Ref. 31334
