DISAMATIC 2013 MK4 18 M AMC 36 M SBC
Type: 2013MK3, upgraded to MK4,
serial number: 772110, year: 1977, weight: 40.000 g
Outside dim.: L ± 70.000mm, W 7.000mm, H 4.000mm
Useful dim.: L 600 mm, H 480 mm
Disa with hydraulic AMC 18m, SBC 36 m, shake-out SCHENK 6000 x 1000 mm, with vibrating conveyor 5000 x 1000 mm, pouring furnace ASEA 1,35 tons, inductor 85 kW, 380V, with second furnace body, with core setter 2043CSE
Ref. 91252
COMPLETE BILLET FOUNDRY FOR SALE
Qty. 1 Second-hand billet foundry plant
Scope of supply:
Qty. 3 Stationary melting furnaces - Mfc.: Schmitz & Apelt
Built: 2 in 1983 & 1 in 1990 Qty. 2 Furnaces with S7 PLC
Recuperative burner system Heated by natural gas
Chimney & hydraulic plants Volume: 8.0 Tons
Capacity: approx. 2.5 to/h hydraulically operated furnace doors
Electrically operated furnace ceilings
Qty. 1 Vertical rail guided continuous caster line Mfc.: Linnemann Built: 1990
Casting length 3700 mm without circular cooling system
Spare casting cylinder Grain refinement machine
Moveable working platform S5 PLC System Hydraulik system
Qty. 5 Complete casting tables incl. accessories and spare parts
Chill cast diameters: 145 mm (48 pieces) 178 mm (32 pieces) 193 mm (28 pieces)
207 mm (28 pieces) 254 mm ( 16 pieces)
VAW hot top chill casting technic
Qty. 10 Casting ladles with heating hoods and tilting joined muzzles
Volume capacity: 4 ton
Qty. 1 Double tilting chair Mfc.: Linnemann Built: 1990
For support of the casting ladles Hydraulic
Qty. 1 Filter box incl. heating device and cover swing device Mfc.: Pyrotek
For 17” and 20” ceramic filter Built: 2004
Channel system
Qty. 1 Band saw unit Mfc.: Sermas Billet support Saw
Fence Exhaust Hydraulic Control unit
To cut the billet of 4.0 m length
Qty. 1 Swiveling ladle pre-heating station Natural gas
Operating with 2 ladle setting places
Qty. 1 Ladle lid lifter and slewing cranes
Ref. 91254
ALUMINIUM FOUNDRY FOR RECYCLING / REMELTING SECONDARY SCRAPS AND PRIMARY ALUMINIUM
1) Equipment : MELTING FURNACE No.1 WITH CHARGING MACHINE & HOLDING FURNACES
No. 1 & 2
Manufacturer : WELLMAN
Year : 1996
Main Technical Characteristics : Structure of furnace made of electrowelded steel, refractory
lining of the furnace, doors air cooled, automatic regulation of the tilting angle, no. 3 burners
high velocity type. Hydraulic unit with tank of 200 lt, pump pressure 138 bar, fluid water
glycole. Capacity of the Furnace 25 tons, melting speed ratio 5,27 t/h. Bath dept 475 mm, fuel
natural gas. Bath temperature 740/760°C , roof temperature 1.150°C. CHARGING Machine
composed by two cars with diesel motor. Capacity 5 tons and dimensions 7.454 x 3.837 x
2.985 mm. Translation speed 23 m/min., pusher stroke 3.000 mm. Electrical board with PLC.
2) Equipment : MELTING FURNACE No.2
Manufacturer : COMETAL ENGINEERING
Year : 1999
Main Technical Characteristics : Type of furnace: static. Structure made of electrowelded
steel, refractory lining of the furnace. Capacity of the furnace 25 tons, melting speed ratio 4
t/h. No. 4 burners with power 1.400.000 Kcal/each. Tyoe fo burners: regenerative, high energy
saving. Fuel natural gas. Overall dimensions: 4.900 mm x 7.000 mm x 6.500 mm. Average
production 5,2 ton/h. Electrical board with PLC.
3) Equipment : HOLDING FURNACES No. 3 & No. 4
Manufacturer : COMETAL ENGINEERING
Year : 1999
Main Technical Characteristics : Furnace capacity 15 tons, melting rate 1,8 t/h, thermal power 1.400.000 Kcal/h, fuel natural gas. Furnace tilting type. Dimensions mm 6.300 x 7.000 x 5.100. Tilting angle 27°. Supporting steel structure made of steel with thickness of 10 mm. Pocket type runner to receive the liquid from the melting furnace. No. 2 burners, No. 2 hydraulic cylinders for tilting, guillotine door with blockage cylinder.
4) Equipment : ROTARY FURNACE
Manufacturer : SIB
Year : 1997
Main Technical Characteristics : Structure made of electrowelded steel and steel plates. Total length 7.420 mm. Charging door diameter 800 mm. No. 1 burner with natural gas fuel installed on movable car. Movable car to discharge the salt with hydraulic motor gear reducer. No. 5 boxes for salt dross discharge. Dedusting system composed by hoods and refractory movable chamber for fume extraction with electric motor. Electrical board with PLC.
5) Equipment : DEDUSTING SYSTEM for melting Furnace No.1 (casting) adn Holding Furnaces No. 1 & No.2
Manufacturer : ECM
Year : 1996
Main Technical Characteristics : Flow rate: 50.000 Emc/h @130°C, hoods for the doors of the furnaces, natural cooler trombone type, filter with bags made of feldt composed by housing made of steel, inlet fume pre-chamber and bottom hopper to collect the dust. Tubular bags made of acrylic fiber (Dralon T), bag cages. Complete insulation with rock wool thk 80-100 mm and external plating made of aluminium 8/10 mm. Heating system during shutdown. Centrifugal fan, single inlet type, and high efficiency.. Self supporting stack made of carbon steel diameter 1.150 -1.200 mm and elevation 15.000 mm. Fume sped 13 m/sec. Electrical board with instrumentation.
6) ) Equipment : DEDUSTING SYSTEM for melting Furnace No.1 (charging side hood)
Manufacturer : ECM
Year : 2000
Main Technical Characteristics : Flow rate: 50.000 Emc/h, filter with bags made of feldt composed by housing made of steel, inlet fume pre-chamber and bottom hopper to collect the dust. Tubular bags (qty 320 pieces) made of acrylic fiber (Dralon T), bag cages. Filtration load ratio 1,5 m/min and emisssion at the stack 10 mg/Nm3. Centrifugal fan, single inlet type, and high efficiency. Self supporting stack made of carbon steel diameter 1.150 mm and elevation 15.000 mm. Suction hood for the furnace and ductworks. Electrical board with instrumentation.
7) Equipment : VERTICAL CASTING MACHINE
Manufacturer : ALMEC
Year : 1997
Main Technical Characteristics : Concret pit under ground. Upper part fo pit made in steel with internal dimensions 2.400 x 3.000 x 650 mm. Hydraulic cylinder double effect, bore 240 mm, stroke 7.000 mm, rod 220 mm. Equipment for casting billets diam. 230 - 230 with 32 positions and billets diam. 178 - 145 with 54 positions. Hot top type, net billet casting length 6.500 mm, weight of billets 20.000 Kg approx. Casting speed variable from 5 mm to 250 mm/1", fast raising and lowering speed with 1.800 mm/1". No. 2 guides on stainless steel plates for platform movement. Volumetric oil pump, frame for bottoms, estraction beam from pit with capacity of 5.000 Kg.
8) Equipment : INGOT MACHINES (Qty 2)
Manufacturer : CIFE
Year : 1997
Main Technical Characteristics : Ingot caster for 150 double ingots 7 Kg/each ingot. Lenght 13.000 mm, width 2.200 mm. No. 6 moulds/min., productivity 5.040 Kg/h. Structure made of steel profiles, roller chain with connections for moulds, bearings independent type. Cooling system fo mould by water sprays from the bottom of the moulds. Natural gas burner for drying and preheating of the moulds before casting the Aluminium.
9) Equipment : DEDUSTING SYSTEM for melting Furnace No.2 and holding Furnaces No. 3 - No. 4 & No.5
Manufacturer : ENVIRONAIR
Year : 1999
Main Technical Characteristics : Flow rate: 62.000 Em3/h @120°C (80.000 Em3/h @200°C). Hoods for the charging doors of the furnaces, dedusting filter bag type composed by housing with panels made of steel plates with inlet prechamber, bottom hopper for dust collection. Filter bags made of aramidic fiber with surface treatment with specific weight 500 gr/m2, bag cages. Complete insulation woith rock wool and external plate 8/10 thickness made of aluminium. Heating system during teh filter shuttdown, centrifugal fan single inlet and high efficiency type, self supporting stack made fo carbon steel diametre 1.500 mm and electaion 15.000 mm. Fume velocity in the stack 13 m/sec. Electrical board with instrumentation.
10) Equipment : DEDUSTING SYSTEM for Rotary Furnace No.2 and Melting Furnace (Radiant tubes) for turnings (after drying equipment)
Manufacturer : PROGECO
Year : 1997
Main Technical Characteristics : Flow rate: 30.700 Em3/h @180°C. Filter bags made of Nomex with teflon surface treatment with specific weight 450 gr/m2, bag diameter 125 mm x 2.530 mm lenght. Suction from the stack of furnaces and from teh hood. Diameter of fume collector 950 mm, diameter of emission stack 850 mm. Stack elevation: 12.000 mm. Bag filtering surface 576 m2. Centrifucal fan with flow rate of 31.000 Em3/h. Fume natural cooler fume /air with fumes travelling inside the cooling tubes. Noise insulation cabin for the fan and covering roof for the filter.
11) Equipment : DEDUSTING SYSTEM for melting Furnace No.2 and holding Furnaces No. 3
Manufacturer : ECM
Year : 2000
Main Technical Characteristics : (Additional dedusting system for the filter indicated in ITEM 9), to separate the fumes from the furnace no. 2 and from the holding furnaces. Flow rate: 70.000 Em3/h with bag cleaning system with compressed air at 5-7 bar. Bag filtering surface 840 m2. No. 480 bags made of Dralon T with teflon treatment with specific weight 500 gr/m2. Diameter of stack 1.300 mm and elevation: 12.000 mm. Centrifugal fan with flow rate of 70.000 Em3/h. Electrical board and instrumentation.
12) Equipment : HOLDING FURNACES No. 5
Manufacturer : COMETAL ENGINEERING
Year : 1999
Main Technical Characteristics : Tilting furnace capacity 12 tons, melting ratio 1.400 Kg/h to melt approx. 2 tons of alloys during 3 hours. Dimensions 4.000 mm x 5.000 mm x 5.500 mm. Supporting structure made of steel thk 8 mm, pocket casting hole to receive the liquid aluminium from the melting furnace. No. 2 burners, no. 2 hydrualic lifting cylinders, charging and deslagging door guillotine type with hydraulic lifting.
13) Equipment : MELTING FURNACE (Tilting type with radiant tubes) for turnings after drying equipment
Manufacturer : SIB
Year : 1997
Main Technical Characteristics : Structure made of steel with insulation and refractory lining. No. 4 burners radiant tubes with Silicium carburun, no. 2 burners with flat flame for the waiting chamber. Heat recuperators for the combustion off gas. Hydarulic unit for the furnace tilting. Hood for fume extraction with surface 7,5 m2 adn flow rate of 4.000 Nm3/h at the temperature of 500°C. No. 4 doors.
14) Equipment : INGOT MACHINE (for waffles)
Manufacturer : T-MASTERS & SONS
Year : 1996
Main Technical Characteristics : Ingot machine for 150 double ingots (5 Kg/each), chain dimension 130 mm, supporting structure made in steel, roller chain made of steel, water-cooling system with spray nozzle below the moulds, natural gas burner for the drying and preheating of the moulds before casting. Movable platforms for the container boxes. Complete with electrical boards and accessories. Mould for waffles instead of ingots.
15) Equipment : INGOT MACHINE (type 394/614)
Manufacturer : T-MASTERS & SONS
Year : 1999
Main Technical Characteristics : Ingot machine for 200 double ingots (7 Kg/each), chain dimension 160 mm, supporting structure made in steel, roller chain made of steel. Inclination angle of machine 10°. Water-cooling system with spray nozzle below the moulds, natural gas burner for the drying and preheating of the moulds before casting. Movable platforms for the container boxes. Complete with electrical boards, UPS System and accessories.
16) Equipment : DEDUSTING SYSTEM for Rotary Furnace and Melting Furnace (Radiant tubes) for turnings (after drying equipment) and 3 suction hoods after magnetic separators
Manufacturer : PROGECO
Year : 1997
Main Technical Characteristics : Flow rate: 30.000 Em3/h. Bag filter type RPM 576/12 with 48 solenoid cleaning valves for the bag and 576 bags with diameter 125 mm x 2.530 mm lenght. Bag filtering surface 576 m2. Centrifugal fan with flow rate of 30.000 Em3/h. Noise insulation cabin for the fan and covering roof for the filter.
17) Equipment : DEDUSTING SYSTEM for Drying Equipment for turnings
Manufacturer : PROGECO
Year : 1997
Main Technical Characteristics : Flow rate: 9.956 Em3/h @180°C. Filter bags made of Nomex with teflon treatment with specific weight 450 gr/m2. Bag diameter 125 mm x 2.530 mm lenght. Suction from the stack of the furnaces . Main collector diameter 550 mm. Emission stack diameter 500 mm with elevation 12.000 mm. Bag filtering surface 180 m2. Centrifugal fan with flow rate 10.000 Em3/h . Natural cooler for the fumes and noise insulation cabin for the fan. Covering roof for teh filter. Electrical board with instrumentation.
18) Equipment : DEDUSTING SYSTEM for Melting Furnace (Radiant tubes)
Manufacturer : ECM
Year : 2000
Main Technical Characteristics : Flow rate: 40.000 Em3/h and bag filtering surface of 420 m2. No. 6 bag compartments with 240 bags made of acrylic fiber (Dralon). Bag diameter 160 mm x 3.500 mm lenght. No. 24 solenoid cleaning valves of the bags. Load filtering ration 1,6 m/min. Dust discharge system from teh bottom hopper with screw conveyor. Stack diameter 950-1.000 mm with elevation 12.000 mm with ladder, platform and connection ports for instrumentation.
19) Equipment : DRYING FURNACE (ROTATING CILINDER) FOR TURNINGS - HEAT RECOVERY/COOLING - CHARGING & DISCHARGING.
Manufacturer : SIB
Year : 1997
Main Technical Characteristics : Treatment capacity of the system 2.000 Kg, conveyor belt 12 meters long for charging the materials in to dryer. Vibrating runner, combustion chamber for gas. Drying cylinder made of steel with thickness 12,7 mm and dimenssions 2.000 mm x12.000 mm. Postcombustion system, heat recuperator / cooler, magnetic separtion system with rotating rolls, transportation belts.
20) Equipment : SCREENING EQUIPMENT AND TRANSPORTATION SYSTEM TO DRYING FURNACE.
Manufacturer : CAM
Year : 1997
Main Technical Characteristics : Rotating screning equipment with double belts, charging hopper, vibarting charging runner, transportation belts, storage and dosing hpper with double screw conveyor. Electrical board for power and automation.
21) Equipment : HYDRAULIC PRESS
Manufacturer : VEZZANI
Year : 1974
Main Technical Characteristics : Equipment purchase from second hand on the year 2000, completly revised and certified. No.2 pressing stages. First pressing stage mm 1.175 x 1.100 x 340, second pressing stage mm 1.350 x 900 x 350. Press capacity 72 tons /each. Dimension of bundle mm 200 x 350 x 250. Average production capacity 80 bundles/hour. No. 2 steel boxes.
22) Equipment : MILL
Manufacturer : PREVIERO
Year : 2000
Main Technical Characteristics : Mill with blades, model PR 2800S complete with hydraulic unit and electrical board for control. Rotor diameter 750 mm x 2.000 mm lenght. Rotating polygonal blades interchangeable. Supporting frame in electrowelded steel, antiwear plate on the rotor and basement. Hydraulic pusher moved by two hydraulic ylinders, power 200 kW.
23) Equipment : PLATFORM BALANCES
Manufacturer : BILANCIAI
Year : 1998 -2001
Main Technical Characteristics : Platform balance (ground level platform) with capacity 3.000 Kg, platform balance (ground level platform) capacity 30/50 tons. Platform balance with capacity 60.000 Kg. Platform balance withy capacity 6.000 Kg. Platform balance with capacity 600 Kg.
24) Equipment : BILLET CUTTING LINE WITH AUTOMATIC STACKING AND DE-STACKING SYSTEM- HOMOGENIEZING PLANT WITH FURNACE AND COOLING CHAMBER
Manufacturer : COMETAL ENGINEERING
Year : 1996
Main Technical Characteristics : CUTTING LINE for billets composed by: charging bench, run in roller table, cutting saw, run out roller table, stacking bench, de stacking bench, weighing device for billet packages. AUTOMATIC STACKING AND DESTACKING for billets composed by: rack 8 positions, lifting platform with stroke 2.500 mm and loading capacity 8 tons. BRIDGE CRANE brand OMIS 12,5 tons. HOMOGENEIZATION PLANT conposed by: homogenization furnace with burners, cooling chamber (air suction type), automatic charging machine.
25) Equipment : HYDRAULIC PRESS FOR DROSS (QtY 2)
Manufacturer : TARDIS
Year : 1997
Main Technical Characteristics : No. 2 Hydraulic presses for dross J.MCINTYRE MACHINERY Ltd with accessories and filter MC for theAluminium recovery from the dross with the following technical characteristis: capacity 200-500 kg, cycle time 5-20 min. Hydraulic pressure 172 bar, motor with hydraulic pump with 7,5 kW power. Hydraulic fluid water -glycol. Centrifugal fan with pwer 4 kW.
26) Equipment : SHREDDER FOR SCRAP & FLOTATION SYSTEM (WEET)
Manufacturer : OBERLANDER SVEDALA (KRUPP GFT)
Year : 1999
Main Technical Characteristics : SHREDDER: complete plant composed by charging chute, supporting structure, mill with motor 1.100 HP-10.000 V, magnetic separator. Dedusting system with cyclone, pre-separator, bag filter with 480 m2 of filtering surface, 480 pieces of bags, maximum temperature 130°C. Centrifugal fan with motor power 75 kW and stack elevation 12 meter. Hourly production with profiles, pipes, plates of Aluminium 12-15 tons/h. FLOTATION SYSTEM: complete plant composed by, separation cylinder diam. 1.200 mm x 1.200 mm, thickner, magnetic cylinder, de-magnetic belts, vibrating runner and transportation belts.
27) Equipment : FLOTATION SYSTEM (DRY)
Manufacturer : GHIRARDUZZI
Year : 1998
Main Technical Characteristics : The plant is composed by: charging hopper for crushed materials with supporting structure, extractor, transportation belt, screening cylinder with 2 screening sections and double motor,. Screening cylinder diameter 2.000 mm x 6.500 mm length. Transportation belts for different size of final material, densimetric separation machine, centrifugal fan with flow rate of 20.000 Nm3/h. Dry dedusing system complete with polyester bags. Roof and stack diameter 650 mmx 12.000 mm elevation. Electrical board for power and automation and magentic separtion at the discharge of materials.
28) Equipment : CHRUSING EQUIPMENT FOR SALT SLAG
Manufacturer : DECCA IMPIANTI
Year : 2000
Main Technical Characteristics : Equipment purchase from second hand on the year 2000, complete with: chrushing machine (manufacturer TROISI) with inlet section of 800 x 600 mm, charging hopper capacity 15 m3, feeding charging system steel plate type with capacity up to 80 m3/h, discharging belts from the crusher, no. 2 material flw deviators made of Hardox steel. ELctrical board, auction hood and dedusting sytem.
29) Equipment : TRATMENT PLANT FOR SALT SLAG
Manufacturer : ENGITEC
Year : 2001
Main Technical Characteristics : Plant for humid crushing od the salt dross of Aluminium, with tretament capaicty of 12.000 tons/year. The plant is complete with filtration system for the off gas, and filtration system for the salt. CHRUSHING PLANT: primary chrushing, secondary chrushing, air filtration, natural gas burners. FILTRATION SYSTEM FOR SALT: preparation and dosing station with capacity of 240 liter/hour, thickner and clarifier , vacuum filter with platform 10m2 for separation of solid/liquid, vacuum pump, water tank coming from cleaning, calrifier DELTA STAK type, peristaltic pump for sludge extraction, piping, valves, instrumentation, electrical and automation board. Charging system for dust of bag filter and lime injection. Water treatment plant for low hardness water.
30) Equipment : CENTRIFUGAL EQUIPMENT FOR SALT VZU 125/3,2
Manufacturer : KRAUSS MAFFEI
Year : 2000
Main Technical Characteristics : The plant is composed by: cartridge with rotor and bearing, basement, antivibration supporting springs, oleodynamic unit. Technical characteristics: diameter of bucket 1.250 mm, density of mixture 1.500 kg/m3, maximum rotation speed 950 r.p.m., operating rotation speed 900 r.p.m.. Maximum charge 732 kg, dimensions 1,950 mm x 2.500 mm x 1.800 mm.
31) Equipment : MILL (BALLS TYPE)
Manufacturer : BALLESTRI
Year : 2000
Main Technical Characteristics : The plant is composed by: ball mill with rotating drum made of steel 150/10 electrowelded, supporitng structure made of HEB 200, rotating equipment made with two shaft diamter 90 mm, filter bag type BRS 160.
32) Equipment : ROTARY FURNACE FOR SLAG RECOVERY
Manufacturer : ALTEK INTERNATIONAL
Year : 2000
Main Technical Characteristics : Rotary tilting furnace mod. 300 OXI/Fuel fired, oxygen system, charging machine, electrical and automation board. Piping for oxygen and natural gas for furnace feeding. Refractory concrete. No. 9 moulds with various sizes.
33) Equipment : DEDUSTING SYSTEM FOR ROTARY FURNACE ALTEK
Manufacturer : ECM
Year : 2001
Main Technical Characteristics : Dedusting system flow rate 67.000 m3/h with peak flow rate of 105.000 m3/h. Design operating temperature 90°C, maximum temperature 120°C. Centrifugal fan with frequency converter, ductwork made of steel diameter 1.100-1.200 mm with total lenght of approx. 100 m. from suction hood to the cyclone installed at the inlet of the filter. Injection system of hydrate lime with silo of 10 m3, active carbon injection systemwith max flow of 20 kg/h. Filter with needle felts bags with compressed air cleaning system. Self supporting stack made of steel with elevation of 15 m. Electrical board for power and automation.
34) Equipment : INGOT MACHINE (type 394/625)
Manufacturer : T-MASTERS & SONS
Year : 1996
Main Technical Characteristics : Ingot machine for 150 double ingots (5 Kg/each), chain dimension 130 mm, supporting structure made in steel, roller chain made of steel, water-cooling system with spray nozzle below the moulds, natural gas burner for the drying and preheating of the moulds before casting. Movable platforms for the container boxes.
35) Equipment : INGOT MACHINE (type 394/581)
Manufacturer : T-MASTERS & SONS
Year : 1998
Main Technical Characteristics : Ingot machine for 150 double ingots (5 Kg/each), chain dimension 130 mm, supporting structure made in steel, roller chain made of steel, water-cooling system with spray nozzle below the moulds, natural gas burner for the drying and preheating of the moulds before casting. Movable platforms for the container boxes.
36) Equipment : INGOT MACHINE (Qty 2)
Manufacturer : T-MASTERS & SONS
Year : 1999
Main Technical Characteristics : Ingot machine for 200 double ingots (7 Kg/each), chain dimension 160 mm, supporting structure made in steel, roller chain made of steel, inclination angle of amchine 10°, water-cooling system with spray nozzle below the moulds, natural gas burner for the drying and preheating of the moulds before casting. Movable platforms for the container boxes.
37) Equipment : STORAGE AND DOSING SYSTEM for Sodium bicarbonate for Dedusting System
Manufacturer : STM
Year : 1999
Main Technical Characteristics : The system is composed by: silos with storag capacity of 30m3, extraction system below the silo, mill RTM 250, noise protection cabin, piping for injecion with diameter 100 mm.
38) Equipment : DEGASER SYSTEMS (Qty 4)
Manufacturer : S.F. FOUNDRY SERVICE SpA – FONDERMAT
Year : 1999
Main Technical Characteristics The system are composed by: No. 3 degasers FIDAL 17 and No.1 degaser FONDERMAT for the degasing and filtering of the Aluminium, each with the following characteristics: thermal power 100.000 Kcal/h, treatment capacity up to 15 tons/h, filter with dimensions 17" x 17", treatment tube made of special graphite, gas argon/nitrogen, working temperature 700-800°C, hydraulic system for teh lifting of the degasing tube. Variable rotation speed of the tube with frequency converter, emptying of teh furnace with hydraulic system.
39) Equipment : EMERGENCY GENERATOR (DIESEL) - 630 KVA
Manufacturer : STAMEGNA
40) Equipment : MV/LV (20 KV/0,4 KV) ELECTRICAL ROOM & POWER CENTER
Manufacturer : ING. GAETA
41) Equipment : SCRAP RADIOACTIVITY DETECTION SYSTEM
42) Equipment : AIR COMPRESSORS
Manufacturer : KAESER
43) Equipment : SPETROMETERS L 10 - L40 (Qty 2)
Manufacturer : SPECTRO ANALYTICAL INSTRUMENTS
Year : 1995 - 1996
Ref. 91260
DISAMATIC 2013 MK4, MOULDING LINES
(TWO) MOULDING LINES
DISAMATIC 2013 MK4
Year of installation: 1980
The lines are still installed, and were producing untill last December 2008.
Perfectly maintened and in very good working conditions.
MAX MOULD DIMENSION: 600 x 480 mm
MAX WEIGHT of the casting pieces: 13- 15 kg
MAX PRODUCTIVITY: 350 moulds/hour
The two lines are completed of:
- 1,5 tonn. induction furrnace with automatic pouring system
- 35 mt of conveyours
- auto shake-out system
- magnetic attachment for loading of the casted pieces at the end of the line
- 900 kg ladle for fulfilling of the furnace
- conveyours for recovering of the sand
One line is also provided with the DEVICE FOR AUTOMATIC INSERTION OF THE CORES INTO THE MOULDS.
Ref. 91270
