KUNKEL WAGNER DFM-R-VP-III, MOULDING LINE
MOULDING LINE
Manufacturer Kunkel Wagner
Type DFM-R-VP-III
Manufacture year 1982
General renovated 2006
Capacity 30 moulds / time
Line dimension (above the ground) cca. 42, 5 m x 18 m x 7, 2 m
Mould dimension 1140 mm x 1020 mm x 320 mm
Installed electrical power 300 kW
Note In good condition / V dobrem stanju
Ref. 81299
UBE MODEL 3500 - 3550 TON HORIZONTAL COLD CHAMBER DIE CASTING MACHINE
Installed new June 2008. The machine is principally intended for the casting of aluminium alloy. MACHINE SIZE: Outline Dimensions 20580 x 10874mm. Machine Height 6336mm. Centre Height From Floor 2650mm. Machine Weight 230 Ton
Description
DIE CLAMPING UNIT:
Die Clamping Force 34.8MN (3550 Ton)
Stationary Platen Size 3080 x 2725mm (V x H)
Moving Platen Size 2800 x 2725mm (Vx H)
Space Between Tie Bars 1750 x 1750mm (V x H)
Tie Bar Diameter 375mm. Die Stroke 1500mm
Die Space 1250 – 2000mm
EJECTOR UNIT:
Ejection Force 0.98MN (100 Ton)
Ejector Stroke 250mm
Dimension From Die Mounting Face to Ejector Plate 1500mm
INJECTION UNIT:
Injection Force 1402-2157KN (143-220 Ton)
Plunger Stroke 1600mm. Tip Projection 450mm. Tip Projection Diameter 160mm.
Shot Position 350mm (below machine centre). Shot Speed 50-4500mm/sec.
CASTING ABILITY:
Tip Diameter 160mm. Casting Pressure (MPa) 107.3. Casting Area 3243cm2. Casting Weight (AI) 50.2kg.
Note: Robots Not Included
View ‘Additional Documents’ for the detailed specification
Ref. 812101
DISAMATIC MOLDING LINE, OF YEAR 1997 / 2000
COMPLETE DISAMATIC MOLDING LINE, OF YEAR 1997 / 2000 FOR SALE
as per the below list:
ABB “Twin Power” Induction Furnace, 6000 Kw, 300 Hz, (2) 12T Steel Shell Furnaces, With Spectro Spectrometer
SIMPSON Sand Muller, Model 22-G Multimull, Continuous Type, Up to 100 TPH
Disamatic Molding Machine, Model 2013 MK5B, 535 X 650 Mold Size, 300 Molds Per Hour
Disamatic Pouring Conveyor, 18 Meters
Disamatic Cooling Conveyor, 30 Meters
Vibrating Conveyor from Cooling Conveyor
Didion MD-50 Media Drum, Model Mk5, 1999
Vibrating Conveyor from Didion Drum
Wheelabrator Shot Blast Machine, Tumblast Type, 28 CU. Ft, Manganese Type Belt, Rebuilt in Year 2000
Ref. 91215
GIMATEC, KGM 1600, GRAVITY DIE CASTING MACHINE
1 second-hand gravity die casting machine, tilting for gravity die casting
Make : GIMATEC, Model : KGM 1600, Year : 2009
Equipped with: Sand core drilling device, Trimming device, 10 coolant circles, 8 heating circles, 2 water-colled clamping platens
TECHNICAL DATA:
Locking force 40 t
Clamping platen 1400 x 1600 mm
Ejector stroke 400 mm
Stroke 1500 mm
Daylight width 2300 mm
Operation pressure 65 kg
Dimensions with automation (w x h) approx. 10000 x 8000 mm
Length approx. 8000 mm
Casting unit in pit approx. 2000 mm
Weight approx. 45 t
Ref. 91214
