AIRIMPRESS HORIZONTAL AUTOMATIC MOULDING PRODUCTION LINE
with AIRIMPRESS compression and rammer system
Flask dimension: 900x750x H300+300
Max casting weight: 150 kg
YEAR 1997
10.000 working hours
TECHNICAL DETAILS:
Possibility of 2 automatic cycle: (A) with compression
(B) with compression + rammers
Productivity: with cycle (A) 120 shots/hour
with cycle (B) 80 shots/hour
Max squeeze pressure: 15 kg/cm2
Induction furnaces (2) channel type, press-pour
5000 kg
160 Kw
1 furnace is during maintenance when the other is working
nr. 155 Flasks
nr. 160 Saddles for the flasks
DESCRIPTION OF THE LINE:
1. group for automatic uncoupling of the flasks
2. attachment for automatic cleaning of the flasks
3. moulding line complete with:
- moulding machine (shot/compression or shot/compression/rammers)
- rotating attachment for change the male/female wooden-model
- rollover attachment (to turn 180° the flask)
- shaving attachment (to straight the surface of the mould)
- milling attachment (to mill the mould and realize the hole into which pour the liquid grey-iron)
- drilling attachment (for realize small holes into the mould)
4. automatic model-changing system
5. flask lowering attachment
6. line for manual insert of the cores and control of the moulds (with 2 cranes, 200 kg each)
7. group for automatic coupling of the flasks
8. pouring in-coming line
9. induction furnace – 5000 kg – with press-pour system
10. cooling line
11. 4 floors storage magazine (for flasks waiting for enter into the shaking group) with 2 lines for each floor, including elevating/descending groups
12. automatic group for separate moulds from flasks
13. automatic shaking group (with crane 500 kg)
14. automatic piece-descharging attachment
NOTE:
The storage magazine was realized considering the necessity of a small available floor area.
Therefore the 4-floors storage magazine is not necessary and is possible also to do a simple linear storage magazine for the cooling of the flasks
Ref. 612133
IDRA OL 3500 COLD CHAMBER PRESSURE DIE CASTING MASCHINE
• Manufacturer IDRA
• Type OL 3500
• Year of construction 2003
FULLY PROPORTIONAL with REAL TIME control
Complete with:
- 2 movable columns
Ref. 712143
ITALPRESSE M 1100 , DIECASTING
Mod: M 1100
S/N: 693
Closing force: t. 1100
Injection force: t. 950/840
Ejection force: t. 480
Distance between tie bars: mm. 945x945
Tie bar diameter: mm. 195
Platen dimensions (WxH): mm. 1500x1520
Tie height (min-max): mm. 425-1040
Moving platen stroke: mm. 950
Max. shot weight: kg. 23
Machine weight (approx.): t. 55
Size (LxWxH): m. 10.2 x 3 x 3.15
Ref. 8128
REALPRESS OL/320 PRP DIECASTING ALUMINIUM
Diecasting aluminium:
REALPRESS
Mod: OL/320 PRP
S/N: 9411
Max. Injection force: KN 379
Injection travel: mm. 400
Max injection pressare: BAR 335
Closure power: KN 3450
Opening power: KN 900
Centre extrusion power: KN 180
Centre extrusion travel: mm. 120
Travel of moving plan: mm. 570
Max. opening between plans: 1220
Dimensions of plan: mm. 870 x 870
Distance between the inside of columns: mm. 570 x 570
Diameter of columns: mm. 115
Motor power: KW 22
Pressure of operation: BAR 160
Voltage of operation: VOLT 380 HZ 50
Voltage of command: VOL 24 DC
Power installed: KW 24
Capacity of tank: LT 900
Machine dimension (length x width x height: mm. 5940 x 1905 x 2588)
Machine weight: 13,5 tons
YEAR 1999
Ref. 8129
