HAEUSLER VRM-HY 3000 X 50/45 HYDRAULIC 4-ROLL-PLATE BENDING MACHINE
1 used hydraulic 4-Roll-Plate Bending Machine Type VRM-hy 3000 x 50/45 mm
Brand HAEUSLER
Year of construction 1990
Overhauled 2013
TECHNICAL DATA
Max. width of plate 3'000 mm
Thickness of plate at max. yield point of 240 N/mm2
for 2‘500 mmedge setting at max with of plate 45 mm at bend-
at 2‘000 mmrounding 50 mm at bend-
Prebending length at s = 45 mm X = 2,4 x s
Roll diameter top roll 550 mm
bottom roll 530 mm
side rolls 400 mm
Smallest bending diameter 630 mm (depending on spring back of material)
Number of rolls 4
Driven rolls 2 top- und bottom rolls
Drive over hydro motor
Working speed 2 + 4 m/min
Adjustment speed: bottom roll 0-200 mm/min
side rolls 0-700 mm/min
Speed compensation between top- and bottom roll automatic
Power 75 kW
Operation of the tilting bearing hydraulic
Tilting of the top roll hydraulic
Bearing block hydraulic
Working voltage 380 V/50 Hz/3 Ph
Indication of roll position digital
Weight of machine approx. 45 t
Accessories
• Cone bending device
• Machine foreseen for changeable top roll
• Changeable top roll Ø 440 mm
Top• roll changing device
• Central lubrication
• Instant break
• Digital display
• Mobile control desk
• Upper plate supporting device, supporting diameter max. 4’000 mm
Gas• accumulator for running across a welding seam
Ref. 51388
.
HAEUSLER VRM-HY 3000 X 85/70 HYDRAULIC 4-ROLL PLATE BENDING MACHINE
1 used hydraulic 4-Roll Plate Bending Machine Type VRM-hy 3000 x 85/70 mm for prebending and rounding of cylinders and cones.
Brand HAEUSLER
Year of construction 2008
TECHNICAL DATA
Surface length of rolls 3‘050 mm
Pre-bending capacity at standard top roll diameter 680 mm
Width of plate Yield point Internal bending diameter Plate thickness Pre-bending factor
[mm] [N/mm2] [mm] [mm] [ ]
3‘000 240 780 50 1.83
3‘000 240 2‘500 70 2.36
3‘000 355 780 40 2.10
3‘000 355 2‘000 55 2.73
Rounding capacity at standard top roll diameter 680 mm
Width of plate Yield point Internal bending diameter Plate thickness
[mm] [N/mm2] [mm] [mm]
3‘000 240 2‘500 85
3‘000 355 2‘500 70
Cone bending capacity:
- continuous bending approx. 75% of prebending capacity
- press method approx. 100% of prebending capacity
Diameter of rolls: top roll 680 mm
bottom roll 640 mm
side rolls 520 mm
Pass between top and bottom roll 150 mm
Smallest possible bending diameter on top roll 780 mm, depending on material spring back
Number of rolls 4
Bearing type of all 4 rolls roller bearing
Max. force against top roll 9‘100 kN
Roll material 40 CrMnMo 7 heat treated to resistance
of 850 - 1‘000 N/mm2
Driven rolls 2 (top and bottom roll)
Rolls drive hydro-motors
Operating speed 2 + 4 m/min
Speed compensation between top and bottom roll automatic
Roll adjustment hydraulic
Tilting of bottom and both side rolls for cone bending stepless from the mobile control desk
Tilting of the hinged front bearing housing hydraulic
Tilting of the top roll hydraulic
Control central, from the mobile control panel
Indication of the side roll position 4 x digital, reading accuracy 0,1 mm
Indication of the bottom roll position 2 x digital, reading accuracy 0,1 mm
Installed power approx. 2 x 55 kW (2 x 75 HP)
Weight of the machine approx. approx. 65 metric tons
Included in Price of Machine are
Operation manual in triplicate
2-roll drive
Automatic central lubrication
Instant brake for roll rotation
4 Digital indications for side roll positions
2 Digital indications for bottom roll position
Safety device against overload of the machine
Electric safety device against tilting of the hinged front bearing housing when bottom roll is under pressure
Electric safety device to avoid, that bottom roll will be moved when front bearing housing is tilted
Mobile control panel
Watercooler for hydraulic oil, consisting of thermostate valve, water connection, heat exchanger
Bending pressure selection of bottom roll from control panel
OPTIONS
Cone bending device
Rolls of high alloyed steel 40 CrMnMo 7, heat treated to resistance of 850 - 1‘000 N/mm2
Extended design of machine suitable to install interchangeable top rolls up to min. diameter of 440 mm
Interchangeable top roll diameter 460 mm
Gas accumulator for running across a welding seam during calibration of welded cylinders with a max. seam height of 2 x 3 mm
Upper plate supporting device, hydraulically adjustable in height
for max. bending diameter of 4‘000 mm Max. carrying force 50 kN
Lateral side support, hydraulically adjustable, Number of supporting rolls 1 Max. carrying force 50 kN
Ref. 51389
HAEUSLER HPR 14-HY-ASYM. HYDRAULIC SECTION BENDING MACHINE
1 used hydraulic Section Bending Machine Type HPR 14-hy-asym.
Brand HAEUSLER
Year of construction 1980
TECHNICAL DATA
Max. section modulus at material yield point of 240 N/mm2 69 cm3
Number of bending rollers 3
Arrangement of the bending rollers asymmetric
Driven bending rollers all 3
Drive of the bending rollers mechanic
Working speed (also at max. section modulus) 3,5 m/min
Speed compensation between top and bottom rollers pneumatic
Adjustable bending rolls two (side roller)
Adjustment of the two side rollers hydraulic
Indicating device for rollers position opticcal, readout accuracy 0,2 mm
No of guide roller supports 2
Adjustment of the guide roller systems:
axial hydraulic
radial hydraulic
slewable manual
Control central, from the mobile control panel
Totally installed capacity 22 kW
Weight of the machine with bending tools approx. 10 t
Operational voltage 380 Volt
Coat of colour green RAL 6011
Accessory:
- 1 Universal bending roll set, e.g. angle, blade outside 130/130 x 16 of Ø min. 1’400 mm
Ref. 51390
HAEUSLER HYDRAULIC 4-ROLL-PLATE BENDING MACHINE
1 used hydraulic 4-Roll-Plate bending machine Type VRM-hy 4000 x 16/15 mm - CNC
Brand HAEUSLER
Year of construction 1999
TECHNICAL DATA
Surface length of rolls 4‘100 mm
Pre-bending capacity
Width of the plate 4'000 mm
Thickness of plate at yield point of 240 N/mm2
Pre-bending at max. width of plate and 750 mm bending diameter 12 mm
Pre-bending length of 12 mm plate thickness X = 3,48 x s
Thickness of plate at yield point of 240 N/mm2
Pre-bending at max. width of plate and 2‘500 mm bending diameter 15 mm
Pre-bending length of 15 mm plate thickness X = 4,25 x s
Rounding capacity
Rounding at max. plate thickness and 1‘500 mm bending diameter 16 mm
For further bending capacities see capacity chart no 4-9234-72525
Cone bending capacity:
Continuous bending approx. 75% of the pre-bending capacity
Press method approx.100% of the pre-bending capacity
Diameter of rolls: top roll 430 mm
bottom roll 400 mm
side rolls 310 mm
Smallest possible bending diameter on top roll 508 mm
Number of rolls 4
Bearing type of all 4 rolls roller bearing
Max. force against top roll 1200 kN
Roll material 42 CrMo 4 heat treated to resistance
of 800 - 900 N/mm2
Driven rolls 2 (top and bottom roll)
Rolls drive hydro-motors
Operating speed 2 + 4 m/min
Speed compensation between top and bottom roll automatic
Roll adjustment hydraulic
Tilting of bottom and both side rolls for cone bending stepless from the mobile control desk
Tilting of the hinged front bearing housing hydraulic
Tilting of the top roll hydraulic
Control central, from the mobile control panel
Indication of the side roll position 4 x digital, reading accuracy 0,1 mm
Indication of the side roll position 4 x digital, reading accuracy 0,1 mm
Indication of the bottom roll position 2 x digital, reading accuracy 0,1 mm
Installed power approx. 18,5 kW
Weight of the machine approx. 25 t
Scope of supply
Machine with motor, electric and hydraulic equipment
CNC-control
Cone bending device
Air cooling of the hydraulic oil
Operating Manual
Automatic pressure compensation between top and bottom roll
2 driven rolls
Central lubrication automatic
Backlash break for rotation of rolls
4 digital displays for side roll position
2 digital displays for bottom roll position
Safety against over load of the machine
Electric safety against open bearing when bottom roll is under pressure
Electric safety to avoid movement of bottom roll during open bearing
Mobile control
Bending pressure of bottom roll adjusted by control
Ref. 51391