STEMA-PEDAX TWINMASTER 16 X SERVO STIRRUP BENDER
STEMA-PEDAX TWINMASTER 16 X SERVO STIRRUP BENDER
Wire Diameter (Single Strand): 6.10mm - 16.00mm
Wire Diameter (Double Strand): 6.10mm - 12.70mm
Feed Rate: 120 m/min
Bending Angle: 0° - 180°
EQUIPPED WITH:
Fully Automatic Computer Control
8 Payoff Reels
Anti-Twist System
Air Conditioning for Control Panel & PC
Year (New 2008)
Ref. 513119
STEMA-PEDAX CADORMATIC RS 300 REBAR SHEAR LINE WITH PERMATIC DOUBLE BENDER
STEMA-PEDAX CADORMATIC RS 300 REBAR SHEAR LINE WITH PERMATIC DOUBLE BENDER
Capacities: 55.12mm x 1 Bar
7.87mm x 30 Bars
EQUIPPED WITH:
Simplex RS 300 Shear
Siemens S7 Control Box
2 Level InFeed Storage
12m Long Gauge Table with 2 Side Kick Off
6 Bin Collecting Pocket for Type 300
PERMATIC Double Bender
12m Conveyor with Support Arms and PC Control
+/- Bending Device 199.90mm x 89.92mm
Device for Roller 500.13mm
Year (New 2008)
Ref.. 513120
WALDRICH SIEGEN PF-H-125 (150) CNC GANTRY MILL
WALDRICH SIEGEN PF-H-125 (150) CNC GANTRY MILL
Table Area: 3987.80mm x 13004.80mm
Maximum Workpiece Weight: 453.55 Metric Tons
Maximum Distance Between Housings: 4368.80mm
TRAVEL DISTANCES:
X-Axis: 13360.40mm
Milling Head, tranverse (Y-Axis): 5334.00mm
Ram, vertical (Z-Axis): 406.40mm
Crossrail, vertical (W-Axis): 3022.60mm
MILLING HEAD:
Milling Spindle Speeds: 0 -170 Low 170- 500 HIgh
Critical Speed:
FEEDS:
Table Feed: 0.08 mm/sec -105.83 mm/sec
Table Rapid Traverse: 105.83 mm/sec
Crossrail Feed: 0.05 mm/sec -31.75 mm/sec
Crossrail Rapid Traverse: 31.75 mm/sec
Milling Head Feed: 0.05 mm/sec -63.50 mm/sec
Milling Head Rapid Traverse: 63.50 mm/sec
Ram Feed: 0.05 mm/sec -42.33 mm/sec
Ram Rapid Traverse: 42.33 mm/sec
EQUIPPED WITH:
MDSIOpenCNC Control (Retrofit in 2001)
111.86 kw Milling Spindle Motor
Manual Head Changer
60 Taper Straight Vertical Head 812.80mm Reach)
60 Taper Right Angle Head 1524.00mm Throat)
50 Taper Right Angle Head 914.40mm Throat)
50 Taper Reversre Vertical Head (Upwards Facing Taper)
Misc Face Mills and 60 Taper Tool Holders
Year (New 1974)
Ref.. 513121
FRORIEP BF 225 FLOOR TYPE BORING AND MILLING M/C - HOR
FRORIEP Floor Type Boring and Milling M/C - Hor.
Type:BF 225
New in:1963
Control:conventional
Description:
with digital readout
telescopic covers
facing head diameter 1030 mm
rotary table 2500 x 2000 mm
floor plate area with T-slots 12000 x 6000 mm
Spindle tool adapter for ISO 50 toolings
two angle clamping plates
chip conveyor and diverse toolholders and clamping units
technical details / additionals / accessories:
spindle diameter 225 mm
x-travel 8000 mm
y-travel 4000 mm
spindle stroke 1800 mm
spindle taper metric 140
spindle turning speed range 0,9 - 350 U/min
feeds 0,2 - 1800 mm/U
rapid travel range 2 m/min
spindle drive 50 kW
total power requirement 85 kW
weight of the machine ca. t
dimensions of the machine ca. m
Subject to alterations ( prior sales and errors exepted).
Ref.. 513122
