TITAN CNC HORIZONTAL BORING MILL
TITAN CNC HORIZONTAL BORING MILL
Spindle Diameter: 200mm
Spindle Travel: 1,500mm
Table Longitudinal Travel: 9,000mm
Table Vertical Travel: 2,950mm
Table Cross Travel: 800mm
Table Length: 10,000mm
Table Width: 2,700mm
Spindle Speed: 450 RPM
EQUIPPED WITH:
Siemens 840D CNC Control
Renishaw Head (Used for Drilling, lifts Spindle Speed to 1200 RPM)
Full Retrofit in 2004 (Siemens Drives, Motors, and 840D)
Ref. 513111
GIDDINGS & LEWIS 800-RFX CNC FLOOR TYPE HORIZONTAL BORING MILL
GIDDINGS & LEWIS 800-RFX CNC FLOOR TYPE HORIZONTAL BORING MILL
Spindle Diameter: 203.20mm
Ram Size 508.00mm x 508.00mm
X-Axis Travel: 19354.80mm (19354.80mm))
Y-Axis Travel: 3962.40mm (3962.40mm))
Z-Axis Travel: 914.40mm
W-Axis Travel: (Quill) 914.40mm
Table Size: (Hydrostatic) 3657.60mm x 3048.00mm (Table One)
3048.00mm x 6096.00mm (Table Two)
Table Infeed Slide 1828.80mm on Both Tables
Spindle Speeds: 5-1500 RPM
Spindle Taper: ANSI 60
Rapid Travel Speed on X Axis 127.00 mm/sec
Equipped With:
G&L8000 M CNC Control with Windows Upgrade in 2008
93.21 kw Spindle Motor
102 position 60 Taper ATC
Rack Tool Changer with 24 Vertical 50 Taper Positions
Rack Toolchanger with 28 Horizontal 60 taper Positions
Microlog IDTool Chip System
Numeriprobe In-Process Gauging
838.20mm Spindle Support
(2) 914.40mm Right Angle Milling Attachments (Programmable)
Davis ITS Tapered Bar Head
Coolant Thru Spindle
Specifications and Attachments Subject to Verification
Roll Up Waycovers
Ref. 513112
TANAKA LMX V111 25 TF6000 CNC LASER CUTTER
TANAKA LMX V111 25 TF6000 CNC LASER CUTTER
Laser Output: 6000W
X-Axis Travel: 18288.00mm
Y-Axis Travel: 3149.60mm
Z-Axis Travel: 200.00mm
Track Span: 3302.00mm
Cutting Capacity (Mild Steel): 25.40mm
Cutting Speed Rate: 10-82.97 mm/sec
Rapid Traverse: 50.44 m/min
Resonator Hours: 16,500
EQUIPPED WITH:
(2) Tables, 2616.20mm x 6096.00mm
Fanuc 16iLB CNC Control
Fanuc C6000-A Resonator
Dust Collector
Dual Scrap Conveyors
Year (New 1999)
Ref. 513113
TRUMPF L3050 CNC LASER
TRUMPF L3050 CNC LASER
Laser Output: 5,000 Watts
Number of Pallets: 2
Table Area: 1524.00mmx3048.00mm
Max. Material Thickness: 25.40mm (Mild Steel)
20.07mm (Stainless Steel)
12.70mm (Aluminum)
Max. Workpiece Weight: 907.00 kg
Positioning Design: Flying Optic
Maximum Range of Movement:
X-Axis Travel: 3124.20mm
Y-Axis Travel: 1600.20mm
Z-Axis Travel: 114.30mm
Maximum Travel Speeds: 200.00 m/min (Axially Parallel)
301.78 m/min (Simultaneous X&Y)
Machine Power Hours: 47,000
Beam On Hours: 23,000
EQUIPPED WITH:
Siemens Sinumerik 840D CNC Control System
Machine & Laser Operator Control Panel
Year (New 2003)
Ref. 513114
