STANKO BORING MILL
Boring Mill STANKO
Technical details :
spindle diameter 160 mm
tool camping metric taper 80 mm
rotary table 1600x1800 mm
9 T- slots 28 mm
workpiece weight 8000 kg
spindle feed 1000 mm
spindle range over the bed 1400 mm
table travelling
- cross 1400 mm
- longitudinal 1600 mm
max boring bar diameter in „telescope” 150 mm
spindle front to „telescope” steady sparing3600mm
dimensions
height 4180 mm
width 4110 mm
lenght 7640 mm
machine weight 29 Mg
machine weight with electrics 33,7 Mg
Machine in very good condition – during renovation
Mechanics excellent
Electrics – installing the new unit
Machine was little working
Ref. 51396
INNOCENTI CWB 29 CNC HORIZONTAL BORING
CNC Horizontal Boring INNOCENTI model CWB 29
Control: CNC ELSAG model AG 1 000
Year of manufacture: 1972
Origin: Italy
List of milling heads : please them find enclosed
Technical details :
X axle 28 632 mm
Y axle 5420 mm
W axle 1250 mm
Z axle 1250MM
Boring bar diameter 200 mm
Spindle Power 100 kW
Max spindle rpm 500
Rotary table 30 T
Ram section : 1230x940 mm.
Rotary table size 2000 x 2500mm
Travel : 1500 mm ( not CNC controlled )
Index degree : the indexing is manual continuous
X and Y-axis have separate drives - W and Z (Ram and e spindle ) have the same drive and cannot be moved at the same time
Lubrication type of the INNOCENTI CWB29:
The base column guide ways are hydrostatics
The carriage headstock guide ways and the headstock ways are permanent forced lubrication with recovery oil
The spindle is permanent forced lubrication with recovery oil
The lubrication of feeding worm of the column base, carriage headstock and headstock are permanent forced lubrication
The feeding trapezoid screw of spindle lubrication is permanent forced lubrication
SPINDLE MOTOR:
Type MVR 315/315 – 4b
Speed : 65; 1000, 2400 RPM
Nominal torque: 702 Nm
Nominal power : 100 Cv
Y – X AXES MOTORS (N°2 motors):
Nominal torque: 6 Kgm
Maximal speed : 3200 RPM
W – Z – U AXIS MOTOR (n° 1 motor):
Nominal torque : 3 Kgm
Maximal speed : 3200 RPM
Ref. 51397
WMW NILES DKZ 6300 RAM TYPE VERTICAL LATHE
RAM Type Vertical Lathe
WMW NILES DKZ 6300
Technical details :
Turning diameter : 6300 mm
Turning diameter, with side-support : 6000 mm
Degrees displacement of the vert. supports : +/- 30 °
Displacement of the side-support : 1800 mm
Workpiece height max. : 2500 mm
Workpieceweight max. : 50000 kg
Chuck diameter : 5300 mm
Speedrange : 0,35 - 14 rpm
Feeding speeds (16) : 0,063 - 11,2 mm/omw.
Rapid speed of the supports : 1000 mm/min¬¹
Rapid speed of the side-support : 500 mm/min¬¹
Connection power : 120 kW
Dimensions of the machine WxDxH : 14,40 x 8,20 x 8,70 m
Weight of the machine ca. : 174.000 kg
Ref. 51398
VERTICAL LATHE SK 50
VERTICAL LATHE SK 50
Technical details :
Table diameter: 4500 mm
Turning diameter: 5000mm
Turning heght: 2500mm
Workpiece weight: 40 ton
Ref. 51399
