ROLLER BOTTOM FURNACE
Ref. 51246
BIRDSBORO MERCHANT BAR ROLLING MILL STANDS
Approximate production rate:
70 tons per hour/350,000 tons per year
Product Size: 2" to 4" Diameter Bar
The Birdsboro Roughing Stands were renovated and modified in the late 90's, subsequently
removed from service. Its production consisted of rebar, squares and rounds, utilizing
6" square billets by 14' lengths
The system consists of four mill stands; the manufacturer is Birdsboro with all available
associated rolls, chocks, bearings, and shoe plate drive assembly components.
It is in good condition.
Description:
(2) 17" x 42" Birdsboro Two High Bar Mill Stand (Nominal 16.00" Mill)
(1) 17.12" x 34.25" Two High Birdsboro Bar Mill Stand (Nominal 14.00" Mill)
(1) 22" x 66" Three High Birdsboro Bar Mill Stand (Nominal 20.00" Mill)
**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER & SUBJECT TO PRIOR SALE**
ALL EQUIPMENT IS SOLD "AS IS-WHERE IS" WITHOUT ANY WARRANTY, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. ALL EQUIPMENT SOLD IS USED.
Ref. 51247
DANIELI,100,000 TPY, SEMI-CONTINUOUS BAR MILL
Manufacturer: Danieli, Italy
New: Late 1980's
Minimum diam. capacity: 8 mm (0.310")
Maximum diam. capacity: 18 mm (0.710")
Product length: 6 - 12 m
Annual capacity: 100,000 TPY
No. of stands: 11 plus Monoblock
Inlet billet size: 120 x 120 mm to 140 x 140 mm
Monobloc max finish speed: 19.03 m/sec (3,745 fpm)
Cooling bed: 32.5 m long x 9.8 m wide
Furnace capacity: 20 tons/hour @ 1,280°C (furnace not included)
Equipment:
• Pusher
• 3-Hi Roughing Mill w/1,170kW Drive
• 2-Stand 2-Hi Intermediate Mill train w/270kW Drive
• Repeater
• Pinch Roll
• Flying Shear
• 4-Stand 2-Hi Intermediate Mill train w/270kW Drive
• 4-Stand 2-Hi Finishing Mill train w/270kW Drive
• Head/Tail/Cropping Shear
• Monobloc Finishing Mill w/1,170kW Drive
• Quenching System
• Pinch Roll
• Flying Shear for small diameters
• Flying Shear for large diameters
• Tail Breakers
• Twin Channel
• Cooling Bed 32.5 x 9.8 meters
• Transfer 27 x 0.5 meters
• Roller Tables 27 x 0.55 meters
• Cold Shear
• Roller table after shear
Lubricating Station #1
• Lubricating Station #2
• Lubricating Station #3
• Lubricating Station for Monobloc
• Hydraulic Unit for Pusher
• Hydraulic Station
The Mill is dismantled and available for immediate inspection and delivery.
Ref. 51251
ERW (API 5L. API5CT) TUBE MILL (340MM X 12,7MM)
Technical Data
Finished pipe：
Round pipe : Φ140m-Φ340mm
Wall Thickness : 3.8mm-12.7 mm
Pipe Length : 6-12m (±3mm)
T./D. ratio : 2%～8%
Technical Standard :
API 5L, API 5CT, ASTM A53, EN10219-2 and GB/T9711.1 GB/T9711,2,3091-2008,13793-2008 ，14291-2006
1. Mfg. Year : 2002, Up grade - until 2007
2008- Export for USA 80,000ton
2. Brand : Taiyuan Huaye Equipment Research Institute Co., Ltd
3. Capacity : 120,000/year 10Hr-day
4. Condition of plant : Excellent, Still Operation
5. Line Speed :
Slitter line 80 M/Min Max
Tube Mill 30M/Min Max
Equipment List
Non-standard equipment :
1 Slitting Line
2. Tube mill Line
1. Feeding car 1
2. Uncoiler 1
3. Pinching & leveling machine 1
4. Shearing & butt welding machine 1
5. Horizontal loop 1
6. Anchor bolt - set shim plate excluded 1
7. Electric control - including cables and buried tube 1
8. Hydraulic system - including plant piping 1
9. Edge trimming 1
10. Forming unit - F-F forming 1
11. Welding device 1
12. Air cooling device 1
13. Water cooling device - plant piping excluded 1
14. Sizing unit 1
15. Flying saw 1
16. Anchor bolt - set shim plate excluded 1
17. Electric control - including cables and buried pipe 1
18. Hydraulic system - including plant piping 2
19. Rollers 5 Set
20. Beveling & end-facing machine 1
21. Hydrostatic tester 2
22. Conveyor - pipe pulling device ,stopper
23. Charging basket 1
24. Straightner 1
25. Seam body UT tester 1
26. Appearance & size detection 1
27. Seam end UT tester 1
28. Painting & Dryer 1
29. Weighing & length measuring 1
30. Oiling& marking 1
Tools
1) Slitting line - Available knives, spacer, separator knives and spacer
2) Tube mill line - Tools(Round tube roller) each 1 set
- 139,7mm - 168,3mm - 177,8mm - 193,7mm - 219,1mm
- 244,5mm - 273,1mm - 323,9mm - 339,7mm
Stand by forming bearing housing 1 lot
End facer head 1set
Saw blade 1lot
Spare part 1 lot
Ref. 51252
