SUNDWIG , 20 ROLLS STRIP ROLLING MACHINE - 1962
Manufacturer: SUNDWIG
Year: 1962
Parameters of the strips which can be rolled:
Strip width : 100-410 mm
Thickness : 0,1-2,0 mm
Coil’s weight on the spooler : max. 5000 kg
Coil’s weight on the reeler : max. 3280 kg
Coil diameter on the spooler : max. 1500 mm
Coil diameter on the reeler : max. 1250 mm
Coil inside diameter : 500 mm
Structure of the equipment:
- Coil’s lifting carriage
- Unwinder and winder
- Core reelers
- Entrance table
- Roll stand with rolls, roll adjusting device
- Operating board
- Thickness measuring
Ref. 51231
DEMAG STRIP ROLLING MACHINE - 1982/2001
• Manufacturer: DEMAG
• Year: 1982
Parameters of the strip which can be rolled:
Width : 100-430 mm
Thickness : 0,2-3,5 mm
Coil inside diameter: 500 mm
Coil outside diameter: 1000-1550 mm
Coil’s weight : max. 5500 kg
Structure of the equipment:
- Horizontal movable unwinding, driven by hydraulic strip inlet roll
- Hydraulic serving car for coil dispatch
- Draw-out, swaying strip guide with passage rolls
- Entrance table with erasing, side rolls
- Roll-stand- rolls and equipments
- Erasing
- Thickness measuring
- Exit rolls
- Winder equipment
- Hydraulic serving car for coil doffing
- Low pressure, hydraulic supply unit
- Control desks: coil dispatcher, auxiliary desk, main desk
- Switch cupboards
- can be sold with the QUARTO (SUNDWIG) strip rolling machine (pos. no 10) only or with the 20 rolls strip rolling machine (pos. no 11)
Ref. 51232
RIPOSCHE ELECTRICAL TOP HAT FURNACE WITH PROTECTIVE ATMOSPHERE - 1980
- 6 pieces available
Max. loading weight : 30 to
Operating temperature of furnace : 700-950 C ?
Process of the annealing cycle : arrangement of heat
hydraulic test
rinsing and annealing
annealing
cooling
heat opening, qualification, sample setting
Mode of heating : the heating is effected in protective atmosphere
(N2; N2+H2)
Structure of the equipment:
Heating bell
Effective inside dia : 2095 mm
Effective inside height : 3836 mm
Outside dia : 2950 mm
Outside height : 4500 mm
Nominal heating effect :450 KW
Voltage : 380 V
Frequency : 50 Hz
Bell bottom
Load holder dia : 1600 mm
Max. loading charge : 30 to
Protecting bell
Effective inside dia : 1800 mm
Effective inside height : 3900 mm
Electrical control unit and switch cupboard
Convectors
5 to coil keeper sytem
Ref. 51233
SUNDWIG 500 STRIP SLITTING - 1962/1989
Parameters of the strip which can be slitted:
Width : max. 500 mm
Thickness : 0,1-3,0 mm
Tensile strength : 270-1200 N/mm2
Coil inside dia : 500 mm
Coil outside dia : max. 1500 mm
Coil weight : max. 5000 kg
Telescopicability : +/- 20 mm
Strip speeds : drawing-in speed : 12,5 m/min
slitting speed : 1st degree : 0-12,5-100 m/min
2nd degree: 0-12,5-200 m/min
Cutting number : 1st degree : 100 m/min
2nd degree : 200 m/min
Main units of equipment:
- Hydraulic car serving the strip sending
- Strip sending unit
- Straightening unit
- Strip middle controling unit
- Entrance stand
- Strip slitting unit
- Trimming unit
- Loop hole
- Pusher car
- Crosscut shears
- Oiling unit
- Guide roll
- Winder unit
- Winder of edge waste
- Hydraulics system
- Air supply
SIEMI BINDING LINE
Material : cold rolled steel coils
Coils:
Strip width: min. 20 mm; max. 400 mm
Strip thickness: min. 0,2 mm; max. 3 mm
Inside diameter: 480-520 mm
Outside diameter: min. 650 mm; max. 1200 mm
Weight: min. 50 kg; max. 1000 kg
Packets:
Weight : max. 5 to
Max. height : 1000 mm, included the pallette
Powers:
Working power : 10 m/min
Production : 60 coils/hour
Ref. 51234
