DIGEP DEK 25 COUNTERBLOW HAMMER
25000 mkg
Percussive energy
min^-1, max. 80 min^-1
Strokes min^-1, max.
min^-1, max.
min^-1, durchschnitt. 7 min^-1
Strokes min^-1, average.
min^-1,
2300 mm
Max. die length
800 mm
Max. height of both dies
Height of the machine above floor
170 t
Total weight
2000 mm
Daylight between the guides
75 – 250 kg
Economic forgeable weight of workpiece
Air consumption, cold air
Ref. 612103
ANSALDO 20TM COUNTER BLOW HAMMER
2 units of 20 TM Counterblow Hammer Ansaldo (like Beche)
weight of upper hammer head 15700 kgm,
weight of lower hammer head 22000 kgm
impacts in a minute 40SPM,
driving power 2 x 180kW,
total weight 123t,
required space 3600 x 1450mm,
height of mahine above floor 6500mm,
ram weight 18,2/19,6t,
ram(front to back) 1450mm,
die height 630mm,
die length 950mm
Ref. 612107
FARQUHAR 3500/7200 TONS HYDRAULIC FORGING PRESS
S/N 1764, NEW IN 1940’S. THIS PRESS WAS ORIGINALLY A 7200 TON QUAD-ACTION FORGING PRESS
SPECIFICATIONS:
Capacity-Main Vertical Movement 3500 Tons
Distance Between Posts 36”
Daylight-Between Bolsters 60”
Stroke of Main Cylinder 36”
Diameter of Main Cylinder 42”
Diameter of Ram Guide Posts (6) 11”
Capacity of Horizontal Cylinders (3)…Each 1225 Ton
Spacing of Horizontal Cylinders around Press 120°
Stroke of Horizontal Cylinders 18” Ea
Cylinder Bore of Horizontal Cylinder 25”
Rod Diameter of Horizontal Cylinder 8”
Speed of Main Vertical Movement-Approximate 500 IPM
Oil Capacity-Approximate 2500 Gal
Motors 400HP x 2 and 350HP x 2
Max Height Above Floor 25 ft
Weight-Approximate 470,000 lbs
CONDITION: Good-One horizontal cylinder assembly is missing. Last used to forge steel flanges. Hydraulic System Updated in 1990’s
This is an unusual press having not only the capacity of 3500 ton from the main cylinder but also having three 1225 ton horizontal cylinders. The horizontal cylinders are 12” above the bolster and spaced at 120° apart around the press. The press is rated at a total tonnage of 7200 tons.
Ref. 612111
VORONEZ M1343, ARCHED TYPE HOT AIR STREAM DOUBLE ACTING FORGING HAMMER 2000KG
(arched type),Voronez M1343, 1975, capacity 2000 kg,
weight 48,7ton,
weight of anwill 30 ton
Ref. 612113
