VORONEZH КЗ044B, 2500 TONS MECHANICAL STAMPING PRESS
Mechanical stamping press VORONEZH 2500 ton ( model КЗ044B)
new 1984
complete set. assembled , condition of a new machine.
.
Original Voronezh, Russia
Nominal force 2500 ton
Table size ( width x length) 2000 x 3960 mm
Slider size 1800 x 4250 mm
RAM stroke 600 mm
Number of work strokes 11 rpm
Max distance between table and slider 1350
Distance between columns 4300 mm
Windows in columns 1050 * 900 mm
Upper table plate thickness -350 mm
Cushion in table – 3 * 270 mm *100 ton
Cushion in slider- 150 mm, 40 ton
Main motor 200 kW 975 rpm
Weight of press 437 ton
Ref. 111273
FORGING LINE FOR RAILWAY WHEEL
FORGING LINE FOR RAILWAY WHEEL
1) Forging press of 6300 TF
2) Rolling mill for wheels
3) Forging press of 3150 TF.
ON this forging line can manufactured railway wheels with max. dia. of 1250mm.
1) The Forging press of 6300 TF is working with water under pressure of 400 bar. It has one single forging point having a stroke of 900mm. The press consists of following subunits:
- Main hydraulic cylinder with dia. of shaft 1420mm and height 4050mm
- 4 guidance columns with dia. 534mm each and height 10400mm having distance between columns of 2400mm on one direction and 2600mm on other direction
- 2 lifting hydraulic cylinder with dia. of shaft 340mm and height 1478mm
- 2 hydraulic cylinder for balancing with shaft dia. 280mm and height 1478mm
- Upper table
- Lower table with linear movement
- Hydraulic installation
2) Rolling mill for railway wheels consists of :
a) Pressure rolls with following technical data:
- Roll dia. 1650mm
- DC motor with gear box of 120 Kw
- Roll turning speed 0 – 20,6 rpm
- Pressure force 123 TF on 200 bar
- The rolling mill is working with water under pressure
b) Pressure rolls for the wheels forming:
- Rolls dia. 425mm
- DC motor of 320 Kw
- Gear box
- Roll turning speed from 0 – 66,7 rpm
- Pressure force 69,2 TF at 200bar
c) Rolls for side parts of wheel:
- Rolls dia. 494/280mm
- DC motor of 15 Kw
- Gear box
- Pressure force – 50 TF
d) Guidance rolls:
- Rolls dia. 360mm
- Pressure force 30,8TF at 200bar
- The rolls work without mechanical feeding
3) Forging press of 3150 TF is working with water under pressure of 200 bar. It has one single forging point having a stroke of 760mm. This press is making the hole in the middle of the wheel and calibrates the wheel. The press has following components:
- main hydraulic cylinder
- 4 guidance columns
- 2 lifting cylinders
- 2 balancing cylinders
The whole forging line works with heated raw material. Some subunits of the forging line are manufactured by Schloemann factory Germany. The other are manufactured in Romania after Schloemann drawing. The whole forging line works automatically being necessary ab. 6 persons for its running.
Total weight of installation is ab. 1000 to.
Ref. 111276
KB 8040 1000 TONS, K04.019.840 - HOT FORGING PRESS
Hot forging press K04.019.840 (KB 8040) 1000t
Tech data:
Rated force TN 1000
Slide stroke, mm 250
Frequency of the slide strokes per min 90
Distance between table and punch plate of slider in case of upper table location, mm 560
Adjustment of distance between a table and slider, mm 20
Bed dimensions, mm 770x990
Slide dimensions, mm 720x720
Course of a, mm:
Lower extractor 40
Upper extractor 40
Force, TN
Lower extractor 5
Upper extractor 3,15
Overall dimensions, mm 4350x3500x5145
Mass, kg 65150
Ref. 111277
STANKO- RJAZAN TYPE B1138 - B1139 A / EUMUCO HVP 500 HYDRAULIC HOT FORMING PRESS
1. Upsetter STANKO- RJAZAN type B1138
Nominal force of pressing : 630 t
Travel of the pressing slide : 290 mm
No. of strokes of the pressing slide : 40 per min.
Travel of the mobile die : 160 mm
Dimensions of the die/matrix :
length 560 mm,
width 200 mm,
height 590 mm.
Overall dimensions : 3230x5000x2800 mm
Weight : 55.500 kg.
2. Upsetter STANKO- RJAZAN type B1139 A
Nominal effort 800 tons
Stroke of moving matrix 180 mm
Full stroke of extruding slider 380 mm
Working stroke of extruding slider 250 mm
Back stroke of extruding slider, matrix are closed 130 mm
Distance between extruding slider and matrixes 140 mm
Slider strokes 33 per min.
Matrix dimensions:
- length 590 mm
- width 220 mm
- height 660 mm
Main drive 40 kW
Overall dimensions 5800x3700x2330 mm
Weight of machine 80 t
Both of the machines are in very good condition.
3. Hydraulic Hot Forming Press, type HVP 500, EUMUCO.
- YOM 1985. Perfect condition
- press force 500 ton
- pressure 255 Bars
- ram stroke 600 mm
- force of ram back stroke 50 to.
- distance between uprights 1030 mm
- height 1500 mm
- table 1030 x 900 mm
- ram 1000 x 900 mm
- ram speed 500 mm/s, working pressure 62 mm/s
Ejector
-force 16 ton
-pressure 105 Bars
-stroke 500 mm
Induction Heating device BBC
- working temperature 293- 333 C degrees
Ref. 111284
