BELLOI & ROMAGNOLI BR13.01 MODERN MOULING LINE
1 modern mouling line
Make: Belloi & Romagnoli
Model: BR13.01
Year: 2003
Moulding boxes: 1600 x 1300 x 350/350 mm
Moulding capacity: 25 moulds/h, 50 flasks
Line exists of:
- Multipiston moulding machine with pattern shuttle
- 1 Rollover
- 1 Core setting area
- 1 Remoulding station
- 2 Transfer station
- 4 Pattern plate carrier
- 1 Hydraulic unit
- 2 Cooling lines
- 1 Pouring line
- 1 Pouring furnace Make Progelta, capacity 5 t
power 160 kW
- Push out station
- Shakeout conveyor
- Electric control Siemens S7
Ref. 61317
COMPLETE COPPER AND BRASS TUBE MILL
COMPLETE COPPER AND BRASS TUBE MILL
Production Capacity - 5,000 Tons per year
Main Alloys Produced: Market:
Brass tube C27000
63% Cu/37% Zn Lighting industry, Ornamental
lamps, construction
Admiralty brass tube C4430
71% Cu/28% Zn/1% Sn Water tube, plumbing,
shipboard tube
Aluminum brass
76% Cu/22% Zn/2% Al Oil pipe, gasoline + petroleum industries,
condensers and heat exchangers on ships
Free cutting brass rod, bars & shapes for the hardware industry
Brass Bar and shapes
Brass Wire
Copper tube
- Extruded underwater for the ACR (Air Conditioning HVAC) industries
- Extruded into air cooling for the water and plumbing industries
The Plant includes the following machines:
2200 Ton Loewy Extrusion Press with Piercer, Double-Acting, Water Hydraulic, 10" (250mm) Billet Diameter, Gas-Fired Walking Beam Billet Furnace, Underwater or Air Discharge with Puller, Cutoff Saws, Pumps, Bottles, complete.
Aetna Standard Blaw Knox Pilger Mill, 3 Strand, 570 Kw Motor, Automated Entry System, PLC Controls, 3.7" (94mm) Max. O.D. In., 90% Reduction on copper, Automated Discharge System
60" (1525mm) Marshall Richards Vertical Tube Drop Block, 10 Ton Maximum Pulling Force, Maximum Entry 1.77" (45m) O.D., Minimum Exit 0.315" (8mm) O.D., 1530mm Drum Height, Payoff Station, Discharge Conveyor, Overhead Meat-Hook Coil Transfer System, 125 Kw Drive, 1500 FPM (351m/min.), can draw from straight lengths or coils
54" (1372mm) Marshall Richards Vertical Tube Drop Block, 10 Ton Maximum Pulling Force, Maximum Entry 1.77" (45mm) O.D., Minimum Exit 0.315" (8mm) O.D., 54" (1372mm) Drum Diameter, 72" (1830mm) Drum Height, Payoff Station, Discharge Conveyor, Overhead Meat-Hook Conveyor System, 100 KW Main Drive, 1312 FPM (400 FPM) Speed, Krollman Pointer, can draw straight lengths or tubes.
40" (1016mm) Fenn Model VNC40 Spinner Block, Maximum Pulling Force 8700 Lbs. (3950 Kg), 270-2065 FPM (83-630m/min.), Maximum Entry Diameter 1" (125mm), Minimum Exit Diameter .076" (1.9mm) x .018" (.46mm) Wall Thickness, 100 HP Main Drive, Carrousel Basket Load System w/Transfer Conveyors, Krollman Pointer
Schumag Model KZR-GR1 Combined Draw, Straighten and Cut Machine for 0.236"- 1" (6-25mm) Diameter Tube, Flying Saw, Straightener, 40 HP Drive, Exit Discharge Rack, 130 FPM (40m/min.), 3.15 Ton Pulling Force, Two Available.
Schumag Model KZ-P1-S Combined Draw, Straighten and Cut Machine for up to 1" (25mm) Diameter Tube, 40-88 FPM (12-27m/min.), 75 HP Drive, Payoff, Straightener, Drawer, Flying Saw, Runout Table
100,000 Lb. (45 Metric Ton) Single Die Drawbench, 200 HP, 4.3" (110mm) Maximum Entry O.D., 68 Ft. (21m) Maximum Draw Length, Single Chain, Side Discharge
40,000 Lb. (18 Metric Ton) Demag Three Die Drawbench, 210 Kw, Maximum Entry O.D., 1 Tube @ 2.75" (70mm), 2 Tubes @ 2" (52mm) or 3 Tubes @ 1.5" (40mm), Maximum Length of Draw 65 Ft. (20m)
30,000 Lb. (13.6 Metric Ton) Aetna Standard Single Die Drawbench, 150 HP, Maximum Entry O.D. 1.75" (45mm), Maximum Draw Length 91 Ft. (28m)
30,000 Lb. (13.6 Metric Ton) Aetna Standard Single Die Drawbench, 125 Kw, Dual Chain, Bottom Drop, Maximum Length of Draw 52 Ft. (16m)
Three Nasseheur Gas-Fired Roller Hearth Continuous Annealing Furnaces
Bronx Model 6CR5 BW 6 Roll Rotary Straightener, 2 x 20 HP Drives, w/Entry and Exit Tables, Hyperbolic Rolls for 1/2"-2-1/2" (13-65mm) OD Tubes
Keiserling 7 Roll Straightener for 0.315"- 2" (8-50mm) O.D. Tube, 2 x 9.5 Drive Motors, 2 Straightening Rolls, 5 Non-Driven Support Rolls, Air Operated Load and Unload Tables
Slava 7 Roll Tube Straightener for 1"- 3.6" (25-92mm) O.D. Tubes, 20 HP, 2 Straightening Rolls, 5 Non-Driven Support Rolls, Air Operated Load and Unload Tables
B&O Model 94DHX Circular Tube Cutting Saw, for Single of Multiple Tubes, Air Clamping, Chip Extraction System
Plus numerous Saws, Magnetic Analysis Testers, Domino Tube Marking/Etching Machine, Inspection Line, Dies, Plugs, Mandrels, Shears and Pointers
Ref. 61335
Fröhlich Anlagenbau VG 10 und VG 6 vertical centrifugal casting lines
Fröhlich Anlagenbau VG 10 und VG 6 vertical centrifugal casting lines
2 vertical centrifugal casting lines
manufacturer: Fröhlich Anlagenbau
type: VG 10 und VG 6
built in: 2009, unused
1. vertical centrifugal casting line VG10
consting of:
- base frame
- high speed spindle
- rotary table with centring device and spindle
- oil circular lubrication
- rotation speed control up to 600 UpM
technical details:
complete e-control for 45 KW motor
dimensions of workpiece:
- outside diameter: 950 – 1.100 mm
- inside diameter: 700 mm
- length, max.: 600 - 700 mm
- weight, max.: 2,7 to
The machine is without parts for the basements, molds protection, facing and brushing device. Facing and cleaning station for VG6 and VG10 separate order.
2. vertical centrifugal casting line VG6
consting of:
- base frame
- high speed spindle
- rotary table with centring device and spindle
- oil circular lubrication
- rotation speed control up to 600 UpM
technical details:
complete e-control for 30 KW motor
dimensions of workpiece:
- outside diameter: 650 mm
- inside diameter: 300 mm
- length, max.: 550 mm
- weight, max.: 0,7 to
The machine is without parts for the basements, molds protection, facing and brushing device. Facing and cleaning station for VG6 and VG10 separate order.
Ref. 71369
Amino DR500C 500 Tons ALUMINIUM Die Spotting Press-
Amino 500 ton die spotting press- ALUMINIUM
Model : DR500C
Table : 3500mm x 2500mm
Stroke : 2500mm
Die height : 2800mm
MDE500 Crankless Press
Capacity – 500톤
Capability limit(upper position from lower dead point) – 13mm
Stroke – 500
Rpm – 16
Slide adjustment – 510
Die height – 1355
Slide area – 3000*1700
Bolster area – 3000*1700
Air pressure – 5.5
Main motor – 55kW 6P
Adjustment motor – 3.7kW 6P
Emergency stop – 240ms
Max. stop – 260ms
Over run detecting angle – 15°
Serial No. – 12089
YOM – 1980. Aug.
Ref. CGS8133