Hitachi 450mm 4- hi rollimg mill year:1980
450mm 4-hi rolling mill & 450mm 2-hi rolling mill
1)450mm 4- hi rollimg mill
Material :Copper/Aluminium/Bronze/Nikkel
Make:Hitachi(Japan)
Manufactuting year:1980
Electric and control panels remodeling year: 2014
AGC(Auto thickness gage);contact type(Not X-ray)
Make:Japan. Year:2010
Stopped year: 2016
This facility was originally used for making coin money(mint).
Reverse type
Entry thickness: Max,3mm
Delivery thickness:0.3mm~3mm(In case of copper,aluminium )
Delivery thickness:0.3~2mm(In case of steel)
Delivery thickness:0.3~1.5mm(In case of stainless steel)
Product width:450mm
Work roll size:220mm dia. x 500mmL
Back up roll size:540mm dia. x 500mmL
Hydraulic pressing type
Max rolling force:250ton
Main motor: DC 110KW
Reduction gear ratio:6.9:1
Rolling speed:40~80m/min(RPM:400~800)
Strip tension force:230kg-2250kg
Coil weight:950kg
Coil outside diameter:800-1100mm
Coil inside diameter: 400~500mm
Recoiling speed:80m/min
Spare roll: Work roll 10units / Back up roll 2units /Choke 2units
2)450mm 2-hi rolling mill
Reverse type
Coil width:450mm
Make:Hitachi
Year:1980
Inlet: 6mm thickness
Outlet: 2mm thickness(In case of copper, aluminium)
Outlet: 1.3mm thickness(In case of steel)
Outlet: 1mm thickness(In case of stainless steel)
(Equipment list)
Rolling mill body and rolls
Reduction gear
Winder x2
Hydraulic unit
Motor
Contro panel
Spare rolls
etc....
Ref. CGS61732
Niehoff Gruppe Machine No : 10.64659 Continuous Drawing Machines Year:2011
Continuous Drawing Machines
Make:Niehoff Gruppe(Germany)
Year:2011
- Machine No : 10.64659
Frequency : 60Hz
- Number Of Drafts :
- Wire Elongation : Variable
- Number Of Wires : 1
- Wire Material :Superconductor Nb35n
- Inlet Tensile Strength:510N/ ㎟
- Inlet Dia. Max : 6.86mm
- Finish Dia.Max : 2.42mm
- finish Dia.Max : 0.89mm
- Max. Drawing Speed : 15m/s
- Drive Power : 11x43kW
- Power Of Final Capstan Drive :61kW
- Dia. Of Drawing Capstans No.1~3 : 560mm
- Dia. Of Drawing Capstans No.4~11 : 450mm
- Dia. Of Final Capstan : 450mm
- Drawing Die Sizes :ø53mm, Max.37mm Thick
KBM INCONEL Stainless steel wire drawing line Year:2014
Stainless Steel Wire Drawing Machine
Stainless steel wire drawing line
Make:KBM INCONEL(Korea)/Lee eng.
Year:2014
- Max. Coil Weight:2,000kg
- Rod dia.:5.5mmΦ
- Cap:2,000kg Coil × 2ea
- Speed : Max. 100m/min
(2) SALT coating bath and dryer
•Tank Cap : 800×400×800H
•Frame : 800×500×3050H
•Length : 15m
(3) Φ600×8H+Φ600st
- Model : LSD-600
- Type : SPEED CONTROL TYPE
- SPEED : Max. 400m/min
- Inlet : Max. 5.5mmΦ
- Outlet : Min. 1.8mmΦ
(4) 1000kg vertical spooler
- Model : LSP-DV1000
- Speed : Max. 400m/min
- Winding dia. : 3.5∼1.8mmΦ
- Winding weight : 1,000kg
2) Heat treatment Line
(1) 1000kg vertical spool supply
- Model : LTK-VPO1000
- Speed : Max. 15m/min
- Inlet dia. : 3.5∼1.8mmΦ
- Spool Cap: : 1,000kg
- Line composition : 24Head(12×2row)
(2)De greaser
- The number of wires : 24 Wires
- Dia. : 3.5∼1.5mmΦ
- Speed : Max. 15m/min
(3) Heater and cooling system
- Heater(Gas type)
•Size:10,000×2,000×1600mm
- Cooling system(Water)
•Size:7,000×1,270×1,280mm
(4) Φ600 drop type Take-up
- Speed : Max. 15m/min
- Winding dia. : 3.5∼1.8mmΦ
- Line composition : Φ600×(12+12)=24Heads
- Carrier:850mmΦ×1500mmH
- Carrier : 400kg
3) 2nd wire drawing Line
(1) Coil Pay Off × 2ea
-Speed: Max. 100m/min
- Inlet dia. : 3.5∼1.8mmΦ
- Carrier:850mmΦ×1500mmH
(2) SALT coating bath and dryer
•Tank Cap : 700×400×650H
- dryer•Frame : 600×500×2500H
•Length : 17m
(3) Φ400×8H+Φ400st continuous drawing machine
- Model : LSD-400
- Speed : Max. 500m/min
- Inlet dia. : 3.2∼1.6mmΦ
- Outlet dia. : 1.6∼0.6mmΦ
(4) Φ300×8H+Φ300st continuous drawing machine
- Model : LSD-300
Speed : Max. 500m/min
- Inlet dia. : 2.6∼1.2mmΦ
- Outlet dia.: 1.0∼0.6mmΦ
(5) 500kg Vertical spooler × 2ea
- Model : LSP-DV500
Speed : Max. 500m/min
- Winding dia, : 1.6∼0.6mmΦ
- Windinf weight : 500kg
4) 2nd heattreatment Line
(1) 500kg spool supply
- Model : LTK-VPO500
-Speed: Max. 20m/min
- Winding dia. : 1.6∼0.8mmΦ
- Spool Cap: : 500kg
- Line composition : 30Head(15×2row)
(2) Middle Capstan × 2ea
- Model : LMC-M300
- Type : Horizontal type
- Capstan 300mmΦ × 9ea
(3) De greaser
- The number of wire : 30 Wires
- Dia. : 2.0∼0.8mmΦ
- Speed : Max. 20m/min
(4) Heater and cooling system
- Heater(Gas type)
•Size:10,000×2,000×1600mm
- Cooling system(Water)
•Size:5,800×1,270×1,280mm
(5) Φ400 drop type Take-up
-Speed: Max. 20m/min
- Winding dia. : 1.6∼0.8mmΦ
- Line composition : Φ400×(15+15)=30Heads
- Carrier : Max. 250kg continuous drawing machine
Ref. CGS61735
MORI MTU-45 TYPE TITANIUM TUBE MILL Manufacturing Year: 2011
TITANIUM TUBE MILL 2SET(2inch)
APPLICATION OF TITANIUM TUBE: Boiler, Heat exchanger of Power plant / Evaporator of Desalination plant
Make: : MORI (JAPAN)
Model : MTU-45 TYPE
Manufacturing Year: 2011
As good as a brand new because of little use
after installation
(Material specification)
Material: Titanium, Titanium Alloy ,Stainless steel
Strip Width: 35~160 mm
Strip Thickness: 0.4 ~ 2.0 mm
Coil Size I.D.: 508 mm constant
O.D: 1,500 mm max.
WEIGHT: 1,000 KGS max.
(Pipe specification)
Tube OD Range: OD 12.7 ~ 50.8 mm(0.5~2inch)
Tube thickness: 0.4 ~ 2.0 mm
Tune length: 6,000 ~30,000 mm +/- 1.0mm
(Equipment list)
Uncoiler: 1 set
Shear and welder(Tig welding type): 1 set
Accumulator: 1 set
Strip Cleaning Unit: 1 set
Forming Section: 1 set
Welding Section: 1 set
Sizing Section: 1 set
Induction Annealing Section: 1 set
2nd Sizing Section: 1 set
Cut-off Machine: 1 set
Tubing Roll Sets: 2 sets
Electric: 1 set
Common equipment:
Ultrasonic &Eddy Current Testing System
(MAC: U.S.A ,Year:2011)
(Speed)
Mill Speed: 15 M/min. max. (Roll RPM capability)
Pass Height: 900 mm +FL
(Electric)
Power Source: 380V, 60Hz, and 3Ph.
: Fluctuation for Voltage less than 10% and for Hz less than 5%
Control: DC=24V (AC=110V, 60Hz, 1ph)
(Tool)
Titanium Forming Tool:
Ф 15.88, 19.05, 22, 23, 25, 25.4, 38.1, 50
Stainless Forming Tool: Ф 25.4, 31.75, 38.1
