GRISET REVERSING 2 HI/4HI BREAKDOWN/FINISH COLD ROLLING MILL w/ AGC
26" (675mm) GRISET REVERSING 2 HI/4HI BREAKDOWN/FINISH COLD ROLLING MILL w/ AGC
Maximum Incoming Strip Thickness: 0.787" (20mm)
Minimum Finishing Strip Thickness: 0.080" (2 Hi) (2mm)
Minimum Finishing Strip Thickness: 0.030" (4 Hi) (0.762mm)
Factory Has Rolled: 0.015" Thickness (0.381mm)
Maximum Strip Width: 26.5" (675mm)
Maximum Coil Weight: 15,000 Lbs. (6804 Kg)
Mill Speed: 0-328 FPM (100 m/min) 2 Hi
0-820 FPM (250 m/min) 4 Hi
Equipped with Vollmer Gauges and PSI Automatic Gauge Control (AGC)
Hydraulic Operation- Control Pinch Rolls, Side Guides, 4 Roll Straightener
New Upcoiler Installed 2004
Ref. CGS11416
16-1/2" x 34" x 34" BLISS 4 HIGH BREAKDOWN NON-REVERSING MILL
16-1/2" x 34" x 34" BLISS 4 HIGH BREAKDOWN NON-REVERSING MILL
Work Roll Size: 16-1/2" (419.1mm) X 34" (863.6mm)
Work Roll Bearings: Roller Bearings
Back Up Roll Size: 34" (863.6mm) X 34" (863.6mm)
Back Up Roll Bearings
Mill Direction: Left To Right
Screwdowns: Electro Mechanical
Mill Speed: 150/450 FPM (47/140 m/Min.)
Drive Motor: 1000 HP, DC Variable Speed
Upcoiler w/125 HP Drive
Ref. CGS11417
TECHNICA GUSS CONTINUOUS CASTERS
(3) TECHNICA GUSS CONTINUOUS CASTERS
Previous Use:
Width: 24" (609.6mm)
Consisting of:
Shaker Table, Melting Furnace, Holding Furnace
Caster, Withdrawal Unit, In Line Slab Milling
Upcoiler
Four Complete Lines
Ref. CGS11418
VORTEX PICKLING/DEGREASING LINE
26" (660mm) VORTEX PICKLING/DEGREASING LINE
New 2002
Type Line: Degreasing/Wash Line
Line Speed: 700 Fpm (219 Meters Per Minute) Approx.
Consisting of: Payoff, Coil Joiner, Caustic Wash,
Electrolytic Degreasing, Acid Rinse, Rinse Brush Box,
Rinse/Bta/Rinse, 4 Bar Wringer, Air Dryer,Oil Roll
Shear, Passline Roll, Takeup
Thickness: 0.070" (1.8mm) - 0.001" (0.0254mm)
26" (660mm) VORTEX PICKLING/DEGREASING LINE
New 2002
Type Line: Degreasing/Wash Line
Line Speed: 700 Fpm (219 Meters Per Minute) Approx.
Consisting of: Payoff, Coil Joiner, Caustic Wash,
Electrolytic Degreasing, Acid Rinse, Rinse Brush Box,
Rinse/Bta/Rinse, 4 Bar Wringer, Air Dryer,Oil Roll
Shear, Passline Roll, Takeup
Thickness: 0.070" (1.8mm) - 0.001" (0.0254mm)
Ref. CGS11419
