HUSKY PET INJECTION MOULDING MACHINE INCLUDING DRYER AND MOULD
Used PET injection moulding machine incl. dryer and mould.
Machine type : HUSKY INDEX 250 QUAD - P100-110-E140-
Construction Year: 2001, in a perfect condition !
Screw diameter .: 140 mm, Injection volume : 3231 cm³
60 cavity mould, complete with Hot Runner
Preformer neck finish: BPF
Available weights: 34 - 36 - 37 - 39 g (with quick change system)
Mould dryer Plastic System DS 1500
Ref : 41238
EREMA 1718‐TVE - CAPABLE OF RUNNING PP AND PE FILM AT PRODUCTION RATES OF 3,000 TO 4,000 LBS PER HOUR
180mm Extruder, Laser Filter, Water Ring Pelletizer, and Centrifugal Dryer capable of running 4,000 lbs/hour of
PE or PP. Under power and available for inspection.
Including the following components:
2010 Erema 33’ conveyor belt (45” wide) and metal detector with new belt
425 HP Single deck temperature controlled compactor with new blades and 2010 holders
2011 Torit Donaldson DLMC 2/2/15 dust filtration system
Barrel and Screw with significant life remaining (max screw wear is 3.5mm on OD on the first one third
section of the total screw length)
535 HP Extruder drive and gearbox with 2011 oil cooler pump, heat exchanger, and temperature
monitoring control – new gearbox seals, bell‐housing seals, and drive belts
2011 Soft start for compactor motor and 2011 frequency drive control remote panel for extruder motor
One third of heater bands replaced and all new heater wiring in 2011
Oil cooled barrel with cleaned heat exchanger in 2011
Clean electrical control cabinets with 2011 air coolers and updated Erema control software
Erema LF2/350 Dual Laser Filter with 3 sizes of laser screen disks and new scraper blades installed
(Erema’s automatic melt contamination removal system that doesn’t use replacement screen filters)
Dual Vacuum Pot degassing system with 2010 15 HP motor (for processing films, ink, dyes, and high
moisture content materials)
Erema HG‐342 Water Ring Pelletizer with 2011 rebuilt housing, 3 sizes of die heads, and 2 sizes of blade
holder arms
Erema GS3000/212 pellet shaker and water removal screen with two 2010 shaker motors
2011 dual canister 1,000 micron filter box for fines removal from process water
2012 rebuilt process water pump motor with temperature monitoring control
2011 Taco plate heat exchanger for process water cooling
Integrated blower and direct drive, noise protected centrifugal air dryer with 2011 paddles
Maintenance, electrical, software, and parts manuals with maintenance history log
Tooling for screw extraction
Extensive supply of spare parts including heater bands, solid state relays, contactors, dust collector
filters, laser filter scrapers , slide gate, and process water hose
This 1718‐TVE Erema, was manufactured in December of 2006 and originally installed in Europe.
purchased and has extensively rebuilt this machine over the last two years.
capable of running PP and PE film at production rates of 3,000 to 4,000 lbs per hour. It is being offered for sale
so that it can be replaced with a smaller machine that is better suited for small volume production runs due to
the frequent material changeovers typical in our plant.
Ref. 5129
REIFENHAUSER - PREVIERO – FBM – SOREMA – FERLIN – SPIROFLUX, RECYCLING EQUIPMENTS
Extrusion
Make Model Year Description
2xReifenhauser RT 1651 1983 120 mm 33D with kreyenborg back flush screen changers complete lines, with die face cutters. Price each
HPB 100 2005 extruder starts as twin screw over 6 D, rest single screw 100 mm 30D,138 KW drive
PRT 125V 1997 125 mm 36 d extruders with , die face cutters, complete line,
PRT 125V 1996 125mm 36 D 202 KW drive, complete line
PRT 125 /36 1995 125 mm 36 d extruders with , die face cutters, complete lines, price each
PRT 160/37 1996-2003 160 mm 37 d extruder with Kreyenborg back flush screen changer complete line with die face cutter,classifying screen
Erema 1721 TVE DD 2008 complete line as new.
Granulators
Make Model Year Description
Previero MU 100-2500 2000 2500 mm wide, rotor diameter1000mm, with 315 KW soft start, complete with Film feeder, spare blades etc, like new.
Zeno ZSM1000/2000-700 2010 Included in the line, 2 units chaintransport,cellrad seperator,screw feeder, granulator,disc seperator
Herbold SMS 60/80 1983 110 kw, rotor diameter 600 mm, width 800mm,5sets rotor knives and 2 stator knives,feeding belt
2xHerbold SMS 60/80 1983 110 kw, rotor diameter 600 mm, width 800mm,5sets rotor knives and 2 stator knives
Pagani 55120 FA 1999 110 KW drive, 1200x660 mm opening, rotor blades 3, stator blades 2
Transitube 34-68 CB 1995 22 kw, opening 340x680 mm
Transitube 25-45 CB 1995 11 kw, opening 250x450 mm
Dreher s26/41 profile granulator, 18.5 KW drive
Lancellin G150X
Lancellin L60SX 1989 600x600mm, 5 rotor knives,2 stator knives,feeding belt,45 KW drive,screen 8 mm,semi open rotor,2 sets spare knives,blower 2.2KW and dust filter
Dreher S26-41 1980 opening 260x410 mm,rotor knives 3,stator knives 2,5.5KW drive, for profiles
Washing lines
Make Model Year Description
Unknown washing line 2003 Friction washing line Stainless steel
Die face cutters
Make Model Year Remarks & Information
FBM TTE small die face cutter complete wiyth control panel, drier
Werner & Pfleiderer die face cutter for pvc , granulator only with 2.2. KW drive
Tecnova TTC 700 die face cutter, 700 kg/hr, with watering ,cooling basin, centrifuge
Screen changer
Make Model Year Description
120 mm 120 mm hydraulic screenchanger with hydraulic unit
Sorema CF210 1983 210mm, hydraulic screenchnager, with hydraulic unit,overhauled 2003
120 mm screen changer 120 mm with spares
Various
Make Model Year Description
Ferlin FGB25/4 1998 suitable for ranges 1000-2750 KG/hour, three vacuum units Labotec, Garvimetric dosaging
Spiroflux DV screw feeder 0.1-2.8 kg/hour, complete
Spiroflux DV screw feeder 0.1-2.8 kg/hour, complete
Spiroflux DV screw feeder 0.1-2.8 kg/hour, missing controls
W&P Die face cutter for PVC, Breaker plate diameter 200mm
Fuchs 3K 1988 classifyer for 3 components, 0.75 kw vibrator motor
Transitube 1995 Material transport, dosaging equipment,included 2 containers 140 litres , 2 colour units, 2 hopperloaders, 2 press blowers, 2 feeding spirals
Transitube 1995 Material transport, dosaging equipment,included 2 containers 140 litres & 300 litres , 1 hopperloaders, 1 press blowers, 1 feeding spirals
Transitube 1995 Material transport, dosaging equipment,included 2 containers 120 litres ,1 color unit , 1 press blowers, 1 feeding spiral
10 units available price each
8 units, price each
UCON 1200 L BPL 2003 4 units available with several emptying units.1200 litres .
Ref. 71226
BRUECKNER 3 LAYER BOPP EXTRUDER CAST FILM
COEXSH – BOPP E 566 Brueckner
Bruckner 3 layer BOPP extruder cast film plant, year 1984 / modify 1996 & 2004 & 2006
Width of film : 6.200 mm / film thickness : from 22 μm to 50 μm
Max speed : 190 meters / minute
Extruders BANDERA : 2 pcs. first extruder screw diameter 250 mm (year 1984)
second extruder screw diameter 180 mm (year 1996)
Output : 1.600 kg/h depend of film thickness and material combination
Extrusion head / T-die : T-die ¨C 2/3 layers manufacturer SIMPLAS automatic system – 1000 mm width
Chill roll : 1.800 mm diameter, water chilled
MDO : by 12 chromium plated rolls, thermal oil heated
TDO : by heated oven, with thermal oil heat exchanger for net film width 6200 mm
Pull rolls : chromium plated rolls with chilled water
On line slitting : for 3-4 rolls
Surface treatment : Esseci y. 1984 on the internal side - corona Mero y. 2006 on the external side
4 pcs. winder manufacturer Kampf and 2 rewinder are 2000 mm wide and 2 rewinder are 3000mm wide
Thickness gauge X ray (Electronic System ¨C 2004) with feedback on the thermal bolts of the flat die
Electric cabinets : with digital Eurotherm drives and encoder on the motors (2004)
Winders electric cabinets: with Siemens PLC and digital Eurotherm driver with tacky and encoders (2006) - Satellite
extruder supply: automatic 4 ways (Motan - 2006)
Servicies / coller sytem :2 chillers McQuay (700.000 Fr/h each)
Ref. 81273