BRUCKNER BIORIENTED POLYPROPYLENE FILM EXTRUSION LINES - BOPP BOPET - BO19
Film extrusion lines - BOPP BOPET - BO19
Manufacturer: BRUCKNER
Model: Bioriented Polypropylene
Year: 2004
Number of layers: 3
Film structure: ABC
Material: BOPP
Width (mm): 6600
Extruder 1 Description: Type BANDERA; 90mm screw diam;Volumetric Dosing Unit
Extruder 2 Description: Type BANDERA; Two satellite extruders 230/275mm screw
diam;Volumetric Dosing Unit
Extruder 3 Description: Type BANDERA; 90mm screw diam;Volumetric Dosing Unit
Thickness controll system: Automatic Control type Simplas
Chill roll unit: Diam 2200mm;Width 1000mm
MDO description: Type :CO14/6-2/2/90 ; 900mm width;14 preheating rolls;6 drawing rolls;6
annealing rolls;diathermic oil heating system;auxiliary rewinding
TDO description: Type 61G18EP/12/15/3/4,5/660/4.4.4;55meters width;4 preheating zone;4
drawing zone;5 annealing zone;1 neutral zone;3 cooling zone;1 exit zone;Chain clips type FOK
4.4.4;gas heating
Flame treatment: yes;
Rewinder width: 1200
Rewinder description: Rewinder type: A1660GC 45/120 Turret periphery
Slitter: Goebel primer slitter rewinder
Additional informations: BOPP ;Speed : 375mpm;
MDO draw ratio : 1:1 / 1:7 / 1:8 / 1:10
Pull Roll with edge trimi and flame treatment system;thikness measurement;Width 7000mm;type
EFI/TGB A/CB/FT/CB/T660;
Edge trim: two grinding mills in line;Pneumatic transport system and storage silo;coling water;
Chill roll cooling water;Thermal oil boilers and distribution system;18 cores for rewinder;crane
trasport finished roll system;internal silos;
Ref. 111297
SIDEL SBO16, MITSUBISHI - GUNZE FILLING MACHINE, SIDEL SBO6 BLOWING MACHINE - VARIOUS MACHINES FOR PET-BOTTLE PRODUCTION AND FILLING LINES
Various Machines For PET-Bottle Production And Filling Lines:
• SIDEL SBO16 series2
Year : 2000
Condition : Excellent (still on production until Nov.2012)
Capacity : 19,000 BPH with 2L (For Aseptic)
Includes : Preform feeder, Mold chiller, Inspection machines, Air conveyor
Remarks : Molds(2L) can be included subject to be modified and permitted by Coca Cola before dispatching.
• MITSUBISHI filling machine ( complete set)
Products : 2L water, green tea and soft drink(non gas)
Capacity : 200BPM
Filling system : Hot Filling (up to 85℃)
Power supply : 400V, 50Hz ≒700kva
Year : 1992 and after
• SIDEL SBO6 Blowing machine with compressor and without molds
Products : CSD, ASEPTIC
Capacity : 100BPM
Power supply : 400V, 50Hz ≒300kva, 200V, 50Hz ≒300kva
Year : 1997
• GUNZE filling line( complete set)
Products : for hot filling and cold filling
Capacity : 200BPM
Power supply : 400V, 50Hz ≒500kva,
Filling system : Hot Filling (up to 85℃)
Year : 2000
• SIDEL SBO16 Blowing machine with molds( 350 and 500 ml) and compressor
Products : HR
Capacity : 200BPM
Power supply : 400V, 50Hz ≒500kva, 200V, 50Hz ≒500kva
Year : 1992
• one unit of Nissei ASB NH II for PET bottle
year 1994 ,coming machine only
• one unit of Nissei ASB NH
year 1987
coming along chiller , labeler ,dehumidifier packing machine and one mold for 750 ml
• one unit of SIPA ECS 8000
year 1995
coming with two molds( 1800 and 2,000 ml)
• one unit of Jomar preform injection molding machine
year 2002
model : 130
coming with three molds
very limited time of use
• One unit of Husky preform injection molding machine
Year 2000 working hours : 16,600 hours
Model : GL300 PET P100/110/E100
Coming with original Husky robot arm and 48 cavities PP mold( 23 gram)
• 2 Netstal preform injection molding machine from China
Model: PET 3500-6600 R( year 2008) and PET 3500-3550 ( year 2005)
PET 3500-6600 R is in production and 3500-3550 stored at factory
Coming with dryer dehumidifier and molds
• 2 units of AOKI SB III 500 LL 75
year 2009
coming with complete auxiliary machine such as dryer, chiller, mold( 500 or 2,000 ml) discharger labeler, packer dehumidifier
Ref. 11322
TENDERFRAME BOPA LINE
2 BOPA lines
A.
Used Tenderframe BOPA Line
Year 1991
Net film width 3900mm
Material: BOPA
Thickness: 10-25my
Production speed: 150 m/min
Slitter rewinder included
All auxiliaries included
B.
Used Tenderframe BOPA Line
Year 1997
Net film width 3400mm
Material: BOPA
Year 1998
Production speed: 150 m/min
Slitter rewinder included
All auxiliaries included
Ref. 11334
CONTINUOS POLYMERISATION PLANT FOR PET CHIPS- FIBER-BOTTEL GRADES.
UNUSED-ERECTED- Continuos Polymerisation plant for PET Chips- Fiber-Bottel Grades.
complete Continuous Polymerization Plant based on PTA exactly the same as it is described in request in Central Europe Yearly output of PET chips yarn grade is 60 000 Tons.
Minimal effective output is abt. 32 000 Tons of chips.
The plant is totally new erected in 2008.
Continuous Polymerization is based on Aquafil Engineering GmbH technology.It is 2 - Reactor plant technology.The line consists
from UPR® reactor of AQUAFIL Engineering (Universal Polymerisation Reactor) and Finisher.See technological scheme below.
This flexibile configuration enables to achive the same production cost as large scale plants.
The 2-Reactor technology can be used for textile-, film- and bottle applications with IV 0.58-0.68 and technical yarns with IV up to 0.98.
UPR® advantages
• Less equipment cost
• Less utility consumption
• Shorter hold-up and reaction time
• Lower AA-generation
• Lower DEG formation due to large surfaces, low temperatures
• Lower oligomer formation and losses
• Reduced space and building cost
• Shorter project realization time
Ref.11369
