Uralmash Aluminium Extrusion Press
1 aluminium extrusion press
Mfc.: URALMASH Built: 1989 – never used!
Force: 5000 MT Still assembled but not in operation!
Hydraulic: Oil emulsion
Working liquid pressure (from P.A.S.) 320 bar
- in the filling line 10 bar
Central working cylinder (1 pc.)
-Plunger dia. 1120mm -Force 3,15 MN
-Stroke 2500 mm
Side working cylinder (2 pcs.)
-Force 0,996MN(each) -Stroke 2500 mm
Working speed 0,5…20 mm per sec.
Idle speed up to 200 mm per sec.
Reverse cylinder (2 pcs.)
-Plunger dia. 250 mm
-Force 0,157 MN(each)
-Stroke 2500mm
Reverse speed 150 mm per sec.
Container moving cylinder (2 pcs.)
-Plunger dia. 320/200mm
-cylinder break-out force 0.257 MN(each)
-cylinder hold-down pressure 0,157 MN(each)
-Stroke 1000 mm
Crossbar moving cylinder (2 pcs.)
-Plunger dia. 90/70 mm
-cylinder break-out force 0.012MN(each)
-cylinder hold-down pressure 0.02 MN(each)
-Stroke 260 mm
Ref. CGS81313
Heidelberg Speedmaster 74-2
Heidelberg Speedmaster 74-2
offset printing press 2 colors
maximum sheetsize: 530 x 740 mm
minimum sheetsize: 210 x 280 mm
maximum speed: 15.000 sheets/hour
paper thickness range: 0,06 - 0,4 mm
year of construction 1998
CPTronic service system
suction tape feeder board
laser-slit blade-type ink fountain with setting levers
Autoplate
Alcolor dampening system
Baldwin cool- and circulation device
automatic inkroller-washup device
automatic blanket-washup device
automatic impression cylinder washup device
electronic side lay control
double sheet control
decurler
Super Blue delivery
powder spray
impressions: approx. 103 million
Ref. CGS81328
Roland RVF OB 4 Colour Presses
Roland favorit 1986 RVF OB, 4 colour and COATER ,good machine well looked after new uv lamps Approx.140 mil impressions sheet size 720 x 520mm.has printed on Tyvek and Yuppo with no problems up to say 400 microns. Also printed coaster board at 1mm (1000 microns) thick with no issues and printed 55gsm NCR (Carbonless) . Available
Ref. CGS81330
Cerutti R 148 Rotogravure press - 1984
CERUTTI Rotogravure press
Modell: R 148
Baujahr: 1984
Printing width: 1200 mm
Web width max.: 1220 mm
8-Color
Machine composition
1 Unwinder PB 110
1 Preconditioning Group CP 110
1 Inlet draw unit TR 140
7 Printing unit ES 148 E2
1 Printing unit ES 148 S4
1 Web reversing bar
1 Outlet draw unit TR 140
1 Slitter „Trim“ Unit
1 Rewinder RB 210
Materials to be handled:
Paper 40 . 130 g/m2
Light Board and Laminated Material max. 200 g/m2
(250 g/m2 see remark below)
Polyathylen with lower and middle density (NDPE) from 50 µm
Polypropylen (PP) from 20 µm
Polyester (PET) from 15 µm
PETP from 15 µm
Cellophane from 28 g/m2
Aluminium foil from 9 µm
Other suitable material, as a function of the foreseen web tension range.
The press is mainly foreseen to print Paper, light board and laminated material.
Aluminium foil starting from 9 µm should be > 800mm web width (wrinkles).
The press is equipped with spirals Idle rollers
Materials between 200 – 250 g/m² should be < 1000 mm web width.
Main Technical Characteristics
Web width max. 1220 mm
Printing width max. 1200 mm
Web width min. 600 mm
Printing cylinders with face of 1080 – 1270 mm
Printing cylinder repeat length min./max.
with face of 1270 mm 450 – 1000 mm
with face of 1080 mm 500 – 1000 mm
max. reel diameter for
Un- and Rewinder 1050 mm
Web tension range min./max. 4 – 55 kg
max. mechanical speed 300 m/min.
(with printing cylinder repeat >600mm)
max. mechanical revolution 30'000 Cyl.U / hr.
Necessary incoming supply of compressed air, water, Thermo Oil and Cooling water.
Heating installation for the dryer Thermo Oel
• needed temperature 180 – 200 °C
• max. temperature 250 °C
• Thermo Oil SHELL THERMIA 11-(A)
Compressed air for the machine max. 6 bar
Unwinder PB 110 M6
max. Reel diameter 1050 mm
min. Reel diameter 410 mm
for automatic Splice
Automatic Splicing
Outside Core Diameter (O.C.D) 96 mm 240 m/min
from 120 mm 300 m/min
Splicing in either direction
Web tension range min./max. 4 – 55 kg
Adjustable at the main control desk
Printing units ES 148
Printing units 1 – 7: ES 148 E2
Not reversible
Double dryer with a drying lenght of 3500 mm
Printing unit 8: ES 148 S4
Reversible
Double dryer with a total drying length of: 6450 mm
Printing cylinder used
with a face of 1270 mm
CO2-System
On each Printing unit there is a spray nozzle and piping installed up to a central point of the motor side of the machine.
Ref. CGS81331