L-4030, 3000 WATT TRUMPF TURBO LASER CUTTING
Model L-4030, New 1999
Specifications:
Laser Output: 3000 Watt
Maximum Material Thickness: 0.750"
Maximum Workpiece Weight: 2820 Lbs.
Pallet Size (2): 84" x 163"
Travels – X-Axis: 84"
- Y-Axis: 163"
- Z- Axis (Programmable Cutting Head): 4.6"
Positioning Design: Flying Optics
Positioning Accuracy – 48" Width, Single-Axis Move: +/- 0.001"
- Entire Working Range: +/- 0.004"
Repeatability: +/- 0.0012"
Maximum Positioning Speed (Simultaneous): 2362" / Min.
Weight (Est.): 32,000 Lbs.
Equipped With:
Siemens CNC Controls
Trumpf Turbo Laser Resonator – ReBuilt in 2012
Flying Optics
Automatic Pallet Shuttle Tables
Ref : 11237
ANTON BAUER HYDROFORMING PRESS OF 6000 TON
Hyprotec 3000 Internal High Pressure Hydroforming Press
New: 2000
Maximum die clamping force: 6000 Tons (60,000 kN)
Die Table: 154" x 154" with T-slots to attach lower die
Closed Die Installation room: 79" x 154" x 47"
Table height: 36" over ground
(2) lifting cylinders, max die closing force: 400 Tons (4000 kN)
Stroke to open die: 31.5"
Daylight opening: 78.5"
Hydraulic machine system consisting of:
Hydraulic oil tank: 2800 liter
(2) hydraulic pumps
Monitoring units for temp, pressure, level & filtration
(2) cooling systems
Forming system consisting of:
Forming fluid tank
Pump unit for the pressure ntensifier
Shielded pressure intensifier with valve system
Forming fluid filter system
Machine motion control system: Siemens PLC
Machine forming process control system:
Industrial computer with Hyproloc 5000 program
Delta servo Hydroloc controllers (24 axis)
Cycle time of less than 20 seconds
Forming speed controllable to 25mm/s
Main voltage: 3x415V/50Hz, control voltage: 24V DC, Power: 300 kVA
Approximate Overall Weight: 225 Tons
Approximate Overall Dimensions: 12'10" x 12'10" x 20'4" tall
note: this is for the press only, not the ancillary equipment included.
Ref : 11238
LASER CUTTING SYSTEM 5000 WATT LASERCUT
Model 1575, New 2006
Specifications:
Laser Output: 5000 Watt
Maximum Material Thickness – Stainless Steel: 0.750"
Pallet Size (2): 60" x 120"
Rapid Traverse Rate: Up To 3900" / Min.
Positioning Design:. Flying Optics
Electrics: 480V 3/60
Equipped With:
Articulating Arm for Consistent Beam Quality Over Entire Positioning Area
Hypertherm cutting head with Fully controlled Z-Axis and Lens Axis
with 5” & 7-1/2” Lens stations
Pallet Shuttle with (2) 60" x 120" x 1" Thick Automated Pallets
Pressure Tech Head
D. Electron Z32 CNC Controls w/ Windows XP Pro and Syncad Software
Total Enclosure
15,000 BTU Koolant Kooler Chiller, Model HCR1500 PR NF-L
Ref : 11242
MAZAK "SPACE GEAR 510 – MARK II" LASER SYSTEM, 4000 WATT
New 2005
Specifications:
Laser Power: 4000 Watts
Max. Workpiece Size – Flat Plate: 98" x 49" (2500mm x 1250mm)
- Cubic Workpiece: 120" x 60" (3050mm x 1525mm)
Max. Load Capacity: 1782 Lbs./Ft.
Travels – X-Axis: 131" (3335mm)
- Y-Axis: 60" (1545mm)
- Z-Axis: 16.5" (420mm)
- A-Axis: +/- 360 Degrees
- B-Axis: +/- 135 Degrees
Rapid Traverse Rate – X-, Y-, & Z-Axes: 945" / Min.
- A- & B-Axes: 9600 Degrees / Minute
Beam On/Resonator Hours: 10,800+
Equipped With:
Mazak/Fanuc L-64 CNC Controls
FabroGear Cad/Cam Software, Version 2.2.37-13, For 2-D and 3-D Work
Rotary Axis Attachment
Dust Collector
Chiller
Air Chuck w/ Extra Jaws
Non-Contact Compact Cutting Head
Programmable High-Pressure Assist Gas System
Small Parts / Scrap Conveyor
Work Piece Lifter
Ref : 11243
