PENSOTTI 950 VERTICAL LATHE
Mod: 950
S/N: 4463
Table: mm. 900
Vertical travel: mm. 670
Horizontal travel: mm. 650
Cross travel: mm. 540
Ref. 71243
MINGANTI MV512 SL-S, CNC VERTICAL LATHE
Mod: MV512 SL-S
S/N: 6586010001
Spindle’s diameter: mm. 630
Max. turning diameter: mm. 800
Turning height: mm. 700
Spindle power: 43 kW
Spindle’s speed: 1200 n/1’
Automatic turret with 8 positions
CNC SIEMENS 810T
Ref. 71244
TITAN SC 50, DOUBLE COLUMN VERTICAL TURNING LATHE
TITAN SC 50, 2012, see below
The machine from 1987 was geometrically retrofitted and upgraded in 2012. It is supplied with the following new parts:
- new electrical cabinet including Siemens inverter
- new control panel
- new hydraulic equipment
- all clutches and gears have been checked and replaced if necessary
- grinding of guide ways
- all geometrical parameters have been checked
- new painting
- upgrading and retrofitting included also the repair of worn parts and the replacement of worn out parts
Stock-No.: 6440
Faceplate diameter 4000 mm
Workpiece diameter with vertical support 5000 mm
Max. workpiece height 2200 mm
Max. workpiece weight 18000 kg
Max. travel of crossrail 1900 mm
Right vertical support slide travel 840 mm
Left vertical support slide travel 1160 mm
Max. horizontal travel of right support 2750 mm
Max. horizontal travel of left support 2600 mm
Vertical supports max. angular setting +/-35°
Faceplate speeds, stepless 1,02 – 92 rpm
Gearbox feeds 16
Main DC motor 60 kW
Motor for rapid travel of supports 3 kW
Motor for cross-rail 18 kW
Weight of machine 70000 kg
Machine dimensions 65000 x 5000 x 5500 mm
Technical data
Specification
The two columns of the TITAN SC 50 form together with the upper beam a rigid frame to assure a high accuracy. The two
columns are made of cast iron and the upper beam is bolted and doweled to assume rigidity and permanent alignment
allowing the employment of high cutting powers. The cross-rail is supplied with two guides, to guarantee a high travel
precision of the supports. The machine is supplied with two hydraulically balanced and inclinable supports (one turret head).
The table rotates on a cross roller bearing, assuring a very high concentricity of table running. The machine is perfect for
roughing and finishing.
- 2 vertical supports (one with turret)
- 3 tool holders
- 4 clamping jaws
- 1 set of levelling shoes
Ref. 71245
SCHIESS KZ 160 VERTICAL TURNING LATHE
MAKE SCHIESS
Type KZ 160
Reference No. 55386
TECHNICAL DATA:
Table diameter 2.000 mm
Max. Turning diameter 2.200 mm
Turning height 1.500 mm
Max. weight of the workpiece 6.000 kg
Rapid movement of the support 2.250 mm/min.
Adjustment of the cross rail 360 mm/min.
Main Power 40-50 kW
table speed 2,4 – 120 RPM
Special design with cross beam turret:
Ram stroke 850 mm
Diameter of the tool holes 80 mm
Weight of the machine 25 to.
Packing dimensions LxBxH 4.500x3.300x4.000 mm
Space of the machine 5.400x3.300x5.300 mm
Not incl. are any kind of tooling’s, no levelling wedges and
no floor plates.
Ref. 71246
