CNC DÖRRIES CTE-400 KARUSSEL Ø 8.400
• Table Ø : 4.000
• Swing Ø : 8.400
• Turning height : 3.150
• Table load (t) : 80
• Fanuc CNC Control A2
• Side support / head
• Power 400 V / 75 kW
• Excellent condition !
• Displaceable table
• Circular interpolation
• Excellent condition
Ref. 51266
CNC BERTHIEZ KARUSSEL Ø 6.400
• Table Ø : 3.300
• Swing Ø : 6.300
• Turning height : 3.310
• Table load (t) : 40
• NCT 99 CNC Control
• retrofitted in 2000
• Head angle 40 Gr.
• Power 400 V / 45 kW
• Excellent condition !
• Displaceable table
Ref. 51268
BLANSKO SKD-50 DOUBLE COLUMN VERTICAL TURNING LATHE
Type: Double Column
YOM: 1980
Manufacturer: BLANSKO
Very good mechanical condition. Missing electrical some parts.
The machine under conservation.
Factory didn't used this machine at all.
Specification:
Swing: 5300 mm
Table diameter: 4770 mm
Max work-piece height: 4000 mm
Max work-piece weight: 100 ton
Max torque: 236 kNm
Main drive motor output: 2x71 kW
Table revolutions:
-1st stage: 0,5-12/min
-2nd stage: 2,5-50/min
Right head - horizontal cross rail travel: 3800 mm
Left head - horizontal cross rail travel: 3300 mm
Side head - vertical cross rail travel: 2800 mm
Crossing of ram axis over the table centre: 20 mm
Ram slide: 2500 mm
Feeds: 0.1-8000 mm/min
Rapid traverse: 8000 mm/min
Ram cross-section: 340x340 mm
Maximum tool cross-section: 50x50 mm
Maximum cutting force: 100 kN
Cross rail stroke: 3000 mm
Traverse speed: 500 mm/min
Main drive: 100 kW
Power of faceplate: 80 kW
Dimensions:
-Length: 17000 mm
-Width: 10000 mm
-Height: 12000 mm
-Height above floor level: 11500 mm
Machine weight: 130000 kg
Ref. 51273
LINE SA, SV236F60 CU , PLANO MILLING MACHINE 1981
Manufacturer: LINE SA
Machine is complete and used only a little.
Specification:
Max work-piece:
-Width: 3600 mm
-Length: 16000 mm
-Height: 3400 mm
-Weight: 10 ton
Table size: 3000x16000 mm
Table travel speed range: 0...3000 mm/min
Electricity: 3x380 V; 50 Hz; 600 KVA
Machinery weight: 330 ton
Pre-Owned Plano Milling Machine LINE SV236F60 CU made in 1980
Manufacturer: LINE SA
Machine is complete and used only a little.
Specification:
Max work-piece:
-Width: 3600 mm
-Length: 6000 mm
-Height: 2600 mm
-Weight: 15 ton
Table:
-Size: 3000x6000 mm
-Stroke: 6000 mm
-Travel speed range: 0...3000 mm/min
Beam stroke: 2500 mm
Beam travel speed range: 1200 mm/min
Support travel: 3800 mm
Support travel speed range: 0...3000 mm
Spindle speed range: 10...500 rpm
Spindle travel: 1000 mm
Max mill:
-Weight: 25 kg
-Length: 300 mm
-Diameter: 250 mm
Milling head: FA 60 DC
Automatic mills changer (20 units)
Total power required: 45 kW
Ref. 51274
