MESSER GRIESHEIM , OMNIMAT L 6000 CNC PLASMA 3D BEVELLING
MESSER GRIESHEIM , OMNIMAT L 6000 CNC PLASMA 3D BEVELLING
Construction Year: 2011
Technical information
Longitudinal travel X-axis 30000 mm
Cross travel Y-axis 4100 mm
Cutting capacity 60 mm Plasma
Table dimensions (2 x) 14200 x 4800 mm
Plasmasource Hypertherm HT 4001 longlife
Gas cutter 1 plasma Skew Rotator
Produced as (2 column (1) -- .....) portal 6000 mm
Read-out / Control Omnicon CNC
Length L -- R 30 000 mm
Depth Fw -- Bw 7290 mm
Hight 3225 mm
Extra info
The fine radiation plasma technology is outstandingly suitable for smaller angles of intersection. Efficient, with a high cutting velocity and a clean cutting edge, it is a genuine alternative to laser technology. Contrary to torch cutting, fine plasma cutting incorporates an additional current when the material is being cut. This machine has been updated to cut under water and has the appropriate tables.
Messer Griesheim OmniMat L6000 With 2 work surfaces of 14,200 x 4,500 x 60 mm, a bridge width up to 6,000 mm, high dynamics and positioning speeds of up to 35 m/min, the chamfer high speed system offers a great cutting accuracy and contour constancy.
The 5 axis plasma head makes it possible to achieve pinpoint cutting of +/-50°-bevelling. Exact linear guidance provides for fast and precise cutting.
Skew Rotator: the most successful plasma bevel cutting head ever. Compound Skew axis system for high flexibility and productivity No cumbersome arc segments to risk collision or inhibit the cut Unlimited C axis rotation. Full contineous CNC bevelling head!
Z movement: 350 mm
Ref.51338
ESAB NUMOREX NXB 8100 , PLASMA CNC + 5 AXES BEVELING
ESAB NUMOREX NXB 8100 , PLASMA CNC + 5 AXES BEVELING
Technical information
Longitudinal travel X-axis 24000 mm ( adjustable )
Cross travel Y-axis 8400 mm
Cutting capacity Plasma beveling: 80 mm / Plasma straight: 30 mm
Plasmasource Beveling: 2 x Esab 600 amp / Straight: 1 Hypertherm HT2000
Produced as (2 column (1) -- .....) portal
Extra info
---Beveling head: + 1 beveling head (5 axes) + 2 Esab 600 plasma source: They can work simaltaneous (coupled = 1200 Amp or individual 600 Amp) + max. cutting thickness = 80 mm
---Straight head: + 1 straight head + 1 Hypertherm HT2000 + max. cutting range = 30 mm + traveling range (hoses) 24000 mm
---Marking head: + 1 marking head El Tec
The rails and water tank are not included. But we can deliver these parts from our stock
Ref. 51339
LVD , MVSB 12000 x 12 CNC
LVD , MVSB 12000 x 12 CNC
Construction Year: installed 2003
Technical information
Cuttinglength 12000 mm
Max sheetthickness st 45 20 mm
Strokes/min 3/min
Adjustable cuttingedge (from-- to --) 0,5° -> 2,5°
Electric motor (power) 75 kW
Courant needed 220 V - 50 Hz
Weight 209 000 kg
High hold system Yes
evacuation system Yes
Extra info
The BIGGEST SHEAR in the World!!!! Siemens SC7 control CNC Frontgauge 6000 mm Highholdsystem (5 separate sheet support systems) with evacuation device. SPECIAL BUILD FOR CUTTING HARDOX-500 / WELDOX-1100 STEEL with a tensil strength 100 kg Hardox - Weldox Thickness 12 mm
Ref. 51340
COLLET & ENGELHARDT (DE) - FLOOR TYPE HORIZONTAL BORER - BF 175 – 1960
COLLET & ENGELHARDT (DE) - FLOOR TYPE HORIZONTAL BORER - BF 175 – 1960
X=APPR. 12000 MM
- Y=2800, Z=1500
- with 3 floor plates (L4500 x W2000 mm)
- new DRO is recommended (old available too)
- power input wires of electrics from main electric cabinet to the machine electrical cabinet must be prolonged from 8 to 12 m
- some simple wires (4) currently are damaged and shall be replaced - electric schemas are available
Ref. 51351
